19red88quest
Members-
Posts
109 -
Joined
-
Last visited
Profile Information
-
Interests
starquests.
-
Location
osceola,in
-
Gender
Male
Previous Fields
-
Zip Code
46561
-
Model
Conquest
-
Type
TSI
-
Model Year
1988
-
Transmission Type
Manual
-
Interior Color
Black
-
Status
Being Modded
19red88quest's Achievements
Newbie (1/14)
0
Reputation
-
i have the translator settings at zero right now so it runs at the stock afr of 10.0. i tried tuning with the translator when the car was running and the numbers were always different like it has a bad mas sensor or translator and at this point im focusing on getting the car to run first. i bought maf translator extensions, could i possibly have them hooked up wrong causing it not to run?
-
ok so i recently put a new timing chain, gears and all guides ect. had the head freshened up with new vavle job put the motor all back together with new gaskets and it doesnt start. the timing is correct, i have spark, fuel and air. the car will run if your spraying starting fluid into the throttle body with the injectors unplugged. whenever i try to start the car with the injectors plugged in it doesnt fire. i am lost now, i currently have all the nobs on my translator set at zero. if anybody has any ideas or thoughts please chime in i need as much help as possible. thanks
-
proper way to plug in maf translator
19red88quest replied to 19red88quest's topic in Just plain ol' B.S.
yep that works., thanks alot. -
i know ill get jumped on about doing searches , i did search and couldnt find this specific answer im looking for. the modded maf translator plug has 5 prongs to plug into the stock harness, 3 on top and 2 on bottom. the stock harness has 8 slots the prongs can slid into 4 on top 4 on bottom. how do i correcly plug this in? thanks
-
ok i did a couple searches and couldnt find what i was looking for as always. this might be a noob question but oh well. im installing maft extensions and need to know, the plug that comes off the translator and plugs into the stock harness is the one im having trouble with. the pins on the translator are like this 123 and the stock harness is 1234 12 1234 thats the best example i can come up with, any help would be highly appreciated.