-
Posts
126 -
Joined
-
Last visited
About spoolinup
- Birthday 09/14/1991
Profile Information
-
Interests
carss
-
Location
olympia wa
-
Gender
Male
Previous Fields
-
Zip Code
98501
-
Model
Conquest
-
Type
TSI
-
Model Year
1988
-
Transmission Type
Manual
-
Factory Color
Majorca Black
-
Interior Color
Black-Tan
-
Status
On the road
spoolinup's Achievements
Newbie (1/14)
0
Reputation
-
pm'd
-
how do you bleed the lifters?? okay will do then repost thanks
-
need good shape oil pick up or any good tips how to clean mine air, brakekleen???
-
rebuilt the motor had it re machined and the cylinders honed the block cleaned used a set of good stock pistons. brand new rings, all bearings and the head was all rebuilt by a local good machine shop. the motor ran and everything timing is dead nuts on. was reading no oil pressure on the gauge but oil was coming out of the lifters when i first started with the valve cover off to make sure there was good oil flow. the pick up could have plugged and the oil not got to the rings and seated. well now the motor cranks and has low comp in all 4 cylinders about 40-50psi. but the motor did run before could the rings just not be seated good enough to have the motor run. i rebuilt a old oil pump to fix the problem which i thought it was. haven't put in the car yet just got it towed home from work. any ideas tips or things to check. thanks appreciate it. has fuel and spark. email, pm call or txt me i need help asap. 3607914859 zack
-
is it a 1to1 reg?
-
like all the others broken. need new one help me out.
-
what oil should i use durig break in regular 1030 full synth?? whats best
-
what oil should i use aka should i put some in the head before start up how long should i run it for. how long should i not get on the new motor hard. what rpms should i stay under for a while. how long till i do a oil change after first start up. any tips for breaking new motor in thanks.
-
do you hve the link for the cosmos
-
need lowering spring dont wanna chop the stock ones
-
clutch is s*** need either just the disk or clutch and pressure plate also looking for flywheel let me know
-
either new or used but in good condition let me know