Jump to content

questsale

Members
  • Posts

    709
  • Joined

  • Last visited

  • Days Won

    1

questsale last won the day on September 21 2014

questsale had the most liked content!

Profile Information

  • Location
    USA
  • Gender
    Male

Previous Fields

  • Zip Code
    00000
  • Model
    Other
  • Type
    Other
  • Model Year
    Other
  • Interior Color
    Black
  • Status
    On the road

questsale's Achievements

Newbie

Newbie (1/14)

6

Reputation

  1. I have one. $40 shipped.
  2. Engine mounts sold. Trans mount remains. $50 shipped.
  3. That's nothing. Cummins had a recall on a bad oil pump, not all folks took them in for a recall. Pump went dead, engine sized, split the block in half. Nothing salvagable, $35k for a new engine.
  4. Updated. So far I had two people tell me their gonna come and pickup the bulk, and no one has done so. Selling more stuff, still planning on junking the rest. Got two good blocks, and cranks.
  5. I used the timing cover bolts with a washer, no issues. Obviously need to make sure the bolts are 8.8 or better. I think 80mm lenght bolts are good. You might be able to use two of the stock trans bolts to secure the engine to the stand, but need 4 total. Measure the stands standoffs, and add 20mm to the bolt lenght.
  6. You can bolt it through any top bolts holding the timing cover in place, and the top trans bolt in the rear.
  7. $150 shipped. I had a few people ask, most flaked. First with $150 gets it. http://i.imgur.com/lLQu5bL.jpg
  8. Disconnect the motor mounts from the frame, not from the engine. Same in reverse, put engine in with mounts attached to the block. Lift carefully, you always forgot some hose, or line. You can easily remove it with the trans attached, just remember to drain it of oil, or plug the shifter hole, and output or oil will pour out. Same back in, always easier with the trans attached. An engine leverler helps, but not necessary. Do need a friend to help it guide.
  9. I have a friend offering $500
  10. Now out that AN oil feed line to good use
  11. stock vs trilogy have a different spray pattern. trililogy is more narrow, and this causes issues
  12. http://i.imgur.com/rRxgYvM.jpg http://i.imgur.com/g15br7x.jpg http://i.imgur.com/ljIVljE.jpg $300 shipped.
  13. Just got the engine out today, I'll take flyhwheel pics tomorrow
  14. Yea, I have oil cooler lines, and the cooler. I'll post video when I'm back home later tonight
×
×
  • Create New...