Jump to content

dadrab

Members
  • Posts

    47
  • Joined

  • Last visited

Profile Information

  • Interests
    Love to hear it spool.
  • Location
    Augusta, Ga.

dadrab's Achievements

Newbie

Newbie (1/14)

1

Reputation

  1. Oddly enough, I replaced the coil first...nothing. So, I proceeded to replace the fuel filter. Begrudingly, she fired up. So, I put the old coil back in...nothing. I reckon it was a combination of the two. The new coil went back in and she's up and running just fine now. Thanks very much for the answers and well-wishes guys. I surely do appreciate it.
  2. I haven't really been able to check for spark yet due to only having one set of hands. That's definitely on the agenda once I can find someone to help. I have a metal case knock box and wouldn't have thought it to be a problem. Still, it's worth checking. I'm off to get a new fuel filter for now and hope for the best. I'm sure it needs changing regardless.
  3. Good idea. Since my initial post, I've done exactly what you recommend. Some fuel came out (a couple of tablespoons maybe) and there was some pressure - at least enough to cause a little spurt, but not much more. I'll replace the filter and see where we go from there. It has been a while since I've done that.
  4. Good morning, folks. Interestingly, son #2 goes to start his truck this morning (87 Montero with 89 Starquest stock rig under the hood) and it wouldn't fire off. There's plenty of cranking power and I've already swapped in a known good coil. So, it ain't fire. I can hear the fuel pump running and when I pulled the hose from the fuel filter to the throttle body loose, there was a mild pressure release and a little fuel dripped out. So, the fuel pump could be going south, but I'm not sure what kind of pressure that thing should build stock. Could be the filter as well, I suppose. I tend to believe it's getting air. Checked the filter and it looks OK. What do you all think? It ran fine yesterday as he drove it several times. Thanks in advance, all.
  5. It sounds over simplistic, but make sure you're doing your diagnosis in an air conditioned space. When it's 100 degrees outside and you're trying to tell whether the air coming out of a non-air conditioned vent is cooling off, it's naturally going to feel heated...all that's happening is the circulation of already hot air.
  6. Sounds like a fuel issue anyway. How old is the fuel pump? It's pretty easy to change on that thing. Fuel filter could be clogged as well. Has it been sitting for any prolonged period?
  7. I'm assuming this is a naturally aspirated 2.6 engine, correct? Is it stock? Just as a first pass, I'd say there's a vacuum leak somewhere. That spaghetti tangle under the hood is notorious for leaking somewhere. Our old buddy, the Mikuni carb could need to be rebuilt, too. Give us some more details.
  8. Welding cast iron is not something I'd want to mess with - and I can weld. There are specific techniques involved that are not necessary on other types of metals. There was a crack in the manifold on my engine that had been there since I bought it. I'd tried to repair it with a mixture of some sort. It held for a while, but eventually vaporized. When the head had to be replaced recently, I folded up and bought a new manifold from http://www.enginemachineservice.com/conquest.html . It was money well-spent as the manifold came with all new Mitsu. gaskets as well as studs and nuts.
  9. Yep. And, don't put it off. The engine will not heal itself.
  10. Well...GOOD for you, man. I'm glad you got it sorted. I've been following this thread since its inception. Sorry I couldn't help. But, you had guys with real knowledge on your side that stuck with you. I think I've learned a few things, too. Well-done fellas.
  11. @ Frenchi934 Nice site. Thanks for the link. One question, if I may... When you talk about replacing o-rings, which ones specifically? All of them in the system or just the ones on the receiver/dryer? Thanks.
  12. If the valve stem seals are leaking, there's going to be smoke at start-up. Seen it too many times... But, if you're losing three quarts a week, I'm surprised the car will even run.
  13. By now, I'm sure you're sick of hearing "do this; don't do that," but I would not reuse an oil pump. That's too significant a component. They're a royal pain in the tail to get to; an old one might be full of debris that you're trying to get rid of and they're relatively cheap. Buy one from Mitsubishi and be done with worrying about it.
  14. Ummm....Dude...the man's offering to help for the cost of beers. Let him. Grab a case of chillys, load that old block into the back of the car and head his way. That way you can put together a comprehensive list of what you need to build an engine that won't crap out on you in 10,000 miles. There ain't no work worse than the work you have to do twice.
×
×
  • Create New...