Jump to content

G54B bolt sizes


Recommended Posts

well about a few weeks ago i posted about gettin a full g54b engine arp bolt kit. i have finaly got all of the sizes i hope. it took me about 3 days to do. arp sent me a email saying if i got the sizes then they can put together a kit. but even if u just wanna go get a few bolts and need the sizes here they are. now this is for the 88 g54b turbo w/manual trans

if any one notices any thing off please let me know so i can fix it

the only ones i cant seam to find are the flywheel bolts and the bolts for that holds the cam shaft down. so if u have those sizes and would like to throw them in id aprciate it

 

 

and here they all are

thread pitch is 1.25 if iam not mistakin

engine bolts

sending unit

nut,flange 10mm=1

stud 10x25mm=1

balance shaft cover

bolt,flange 6x12mm=2

engine mount

bolt and washer,10x20mm=4

rear crankshaft case

bolt,flange 6x20mm=5

arp main studs part #

207-5402

 

cylinder head

head stud arp part #

207-4202

acelarator clamp bolt for valve cover

bolt.flange 8x12mm=1

valve cover bolt 8x40mm=2

pvc clip stud and nut

stud 8x18mm 1

nut 8mm=1

breather pipe bolt

bolt.flange 6x12mm=1

bolt flange 8x12mm=1

exhaust manifold stud

stud 8x28mm=8

nuts 8mm=8

2 small bolts in back of head

8x25mm=2

2 bolts in front of head

8x50mm=2

intake studs

studs.8x28mm=10

nut 8mm=10

hanger, engine front bolt

bolt,flange 8x14mm=1

 

bottom end bolt kit

rod studs arp part #

107-6003

 

camshaft gear bolt

bolt and wahser 14x70mm=1

wahser,plain 14mm=1

camshaft sproket holder bolt

bolt.flange 6x10mm=4

 

timing cover bolts

bolt,flange 8x68mm=8

bolt,flange 8xx58mm=2

timing cover access cover bolt

bolt.flange 6x18mm=2

bolt for front near crank shaft seal

bolt.flange,8x73mm=1

rear engine adapter plate

bolt and washer 6x12mm=4

 

oil pickup screen nut

nut 8mm=2

oil pan bolts

bolt and washer 6x12mm=24

 

manifold ground cable bolt

bolt and washer 8x12mm=1

 

bolt and wahser 8x28mm=1

 

oil pump

body bolt

bolt,flange 6x16mm=1

cover bolts

bolt flange 6x38mm=1

6x45mm=1

6x22mm=1

10x15mm=1

 

flywheel is 12x1.25, arp # 203-2801

 

heres the bad stainless 300 exhaust manifold studs..

ARP # 400-8013

 

the harmonic balancer bolt is # 207-2501

Link to comment
Share on other sites

well about a few weeks ago i posted about gettin a full g54b engine arp bolt kit. i have finaly got all of the sizes i hope. it took me about 3 days to do. arp sent me a email saying if i got the sizes then they can put together a kit. but even if u just wanna go get a few bolts and need the sizes here they are. now this is for the 88 g54b turbo w/manual trans

if any one notices any thing off please let me know so i can fix it

the only ones i cant seam to find are the flywheel bolts and the bolts for that holds the cam shaft down. so if u have those sizes and would like to throw them in id aprciate it

 

 

and here they all are

thread pitch is 1.25 if iam not mistakin

engine bolts

sending unit

nut,flange 10mm=1

stud 10x25mm=1

balance shaft cover

bolt,flange 6x12mm=2

engine mount

bolt and washer,10x20mm=4

rear crankshaft case

bolt,flange 6x20mm=5

arp main studs part #

207-5402

 

cylinder head

head stud arp part #

207-4202

acelarator clamp bolt for valve cover

bolt.flange 8x12mm=1

valve cover bolt 8x40mm=2

pvc clip stud and nut

stud 8x18mm 1

nut 8mm=1

breather pipe bolt

bolt.flange 6x12mm=1

bolt flange 8x12mm=1

exhaust manifold stud

stud 8x28mm=8

nuts 8mm=8

2 small bolts in back of head

8x25mm=2

2 bolts in front of head

8x50mm=2

intake studs

studs.8x28mm=10

nut 8mm=10

hanger, engine front bolt

bolt,flange 8x14mm=1

 

bottom end bolt kit

rod studs arp part #

107-6003

 

camshaft gear bolt

bolt and wahser 14x70mm=1

wahser,plain 14mm=1

camshaft sproket holder bolt

bolt.flange 6x10mm=4

 

timing cover bolts

bolt,flange 8x68mm=8

bolt,flange 8xx58mm=2

timing cover access cover bolt

bolt.flange 6x18mm=2

bolt for front near crank shaft seal

bolt.flange,8x73mm=1

rear engine adapter plate

bolt and washer 6x12mm=4

 

oil pickup screen nut

nut 8mm=2

oil pan bolts

bolt and washer 6x12mm=24

 

manifold ground cable bolt

bolt and washer 8x12mm=1

 

bolt and wahser 8x28mm=1

 

oil pump

body bolt

bolt,flange 6x16mm=1

cover bolts

bolt flange 6x38mm=1

6x45mm=1

6x22mm=1

10x15mm=1

 

flywheel is 12x1.25, arp # 203-2801

 

heres the bad stainless 300 exhaust manifold studs..

ARP # 400-8013

 

the harmonic balancer bolt is # 207-2501

http://www.youtube.com/watch?v=Wddgfbc6UMw

Link to comment
Share on other sites

arp keeps shooting me to difrent plants. i finaly got ahold of a guy today, i just sent him the mesurements. he said if they dont have them on the shelf they will have to be custom made, inwich would be alot more. i should know something by tomorow. i hope anyway
Link to comment
Share on other sites

  • 5 years later...
  • 1 year later...
 Share

×
×
  • Create New...