Tman Posted June 18, 2015 Report Share Posted June 18, 2015 ok guys I just don't like the way fip says too set up the thermostat area can I get some pics of other ways Link to comment Share on other sites More sharing options...
jonboyb Posted June 18, 2015 Report Share Posted June 18, 2015 I'm welding a housing to mine if I ever use my FIP manifold. I'm trying to dig up a picture of one from a few years ago. Link to comment Share on other sites More sharing options...
Funky Phil Posted June 18, 2015 Report Share Posted June 18, 2015 Im just gonna go with a diff manifold Link to comment Share on other sites More sharing options...
polarisman14 Posted August 12, 2015 Report Share Posted August 12, 2015 I don't have a picture as it isn't installed yet but I will be using an inline thermostat on the upper radiator hose from Meziere. Jeg's makes one too and they are both about $60 and allow use of a off-the-shelf Chevy 350 thermostat. Before it was using two sandwiched-together thermostat housings that looked like garbage and started to leak so I decided to do it this way. I also had to buy an inline temp gauge port. Link to comment Share on other sites More sharing options...
Recommended Posts