I'm gonna type out the list of everything I got and what it comes with and I'll try getting the pics organized and posted at a later time.
PARTS FOR SALE:
Throttle Mixer EGR Valve
- Oil drain tube with screen - Goes from block into oil pan...can't think of word for it lmao. Good condition https://imgur.com/qJPjTE7
Fuel Injectors and Clips - Both Primary and Secondary injectors are crack free and both tested good resistance (5-6 ohms combined). The injector clips were bought from Randy as well (never used). Complete Timing Kit Balance Elimination Kit Water Pump
- Oil Pump - OEM pump with 120k miles. Very clean and damage free. https://imgur.com/KJ3p8CK
Thermostat Housing Timing Cover
- Intake Manifold - $60 shipped https://imgur.com/a/G5mv4
Alternator Turbo Exhaust Manifold Oil Pan
- Valve Cover - Nice and shiny valve cover. Great condition. Comes with new Fel Pro gasket, new PCV valve, and new PCV hose https://imgur.com/BEDWsa5
Distributor Vacuum lines Brass Block Plugs (Freeze Plugs) Inter-cooler Air Intake OEM Radio Oil cooler Power Steering Pump and Reservoir 2 Crankshafts 2 Flywheels 4 OEM rods/pistons
- Cylinder Head - Running OEM cam but replaced springs, seals, lifters, keepers, intake and exhaust valves, and new guides. Machine shop checked over the head and is flat and professionally did the valve job. Head comes with new distributor drive gear and dowel pin from Randy. Assembled to service manual specs and used a high quality assembly lube. All parts bought from Randy!! https://imgur.com/kJsVdq2
- Stainless exhaust valve. Stock head diameter.
- Stainless intake valve. Stock head diameter.
- Schneider 6610 Heavy Duty valve spring kit. 100lb seat pressure @ 1.600. Open pressure @ .500 is 180lbs. Coil binds at .900.
- Fel-Pro Viton valve seals.
- Hydraulic stock replacement lifters.
I Guarantee the parts and condition that I say, but if I overlooked or mislabeled anything, I will REFUND and PAY SHIPPING if what you buy isn't what I said it would be!
Leave a message here, my inbox, my email (firstname.lastname@example.org), or text me (864-506-4173) if interested in anything!
Edited by Cooper, 08 June 2018 - 05:48 PM.