Convette Posted December 7, 2014 Report Share Posted December 7, 2014 (edited) I want to get a list of guys interested in these that are serious about purchasing. I am currently making them in very low numbers and have 2 sets almost ready to ship. The price is $2300 plus shipping. They will be trimmed long and will need to be professionally installed. They will be coming straight out of the molds. As of right now I'm looking to do 5 Sets.. $1000 deposit due immediately. Please let me know if your interested and serious. These are not for the faint of heart or the "purists" by any means. A LOT of cutting is required. These will make your car 6" wider overall and will allow for 335s in the rear, 315s up front, depending on your wheels. UPDATE! Those who have sent deposits, please send final payments as soon as possible, I will be ready to ship in the next few weeks and can provide quotes as soon as they are boxed up! As far as shipping: I am building frames inside the boxes to ensure strength and safety of the parts. They will be stamped fragile and insurance can be provided at your expense. I'm searching every shipping method available to make this as cheap as possible for you guys. If you have a business address to send them to, it will reduce the cost. http://i177.photobucket.com/albums/w239/johnboy9788/DSC_3440_zpsc0b1fb67.jpg http://i177.photobucket.com/albums/w239/johnboy9788/Mobile%20Uploads/IMAG2164_zps8a05873d.jpg http://i177.photobucket.com/albums/w239/johnboy9788/DSC_3459_zps3f828a21.jpg http://i177.photobucket.com/albums/w239/johnboy9788/untitled-75-X3_zpsacf47935.jpg 1 Leefser------------Deposit sent2 speedyquest3 Tae ----------------Deposit sent4 needsq------------Deposit sentI'm going to post these elsewhere in a few weeks, deposits will secure your set. Paypal is JLazorack@gmail.com Edited January 6, 2015 by Convette 3 Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 7, 2014 Report Share Posted December 7, 2014 Will they come with all hardware required to bolt on? I'm interested but can't drop a deposit until end of the month (Christmas kills the wallet!) Quote Link to comment Share on other sites More sharing options...
Convette Posted December 7, 2014 Author Report Share Posted December 7, 2014 Will they come with all hardware required to bolt on? I'm interested but can't drop a deposit until end of the month (Christmas kills the wallet!) They can. I used allens, depending on your car, rivits would be the easiest, as cars that aren't gutted will be difficult to get to all the nuts. Quote Link to comment Share on other sites More sharing options...
speedyquest Posted December 7, 2014 Report Share Posted December 7, 2014 (edited) Oh man dude... I'm so torn. I'd like a set but I kind of already did the little brother version of them. Count me as a tentative yes. Edited December 7, 2014 by speedyquest Quote Link to comment Share on other sites More sharing options...
needsq Posted December 8, 2014 Report Share Posted December 8, 2014 Hmmmm to bad I just bought some brakes...after the holidays I will see if I can still get in on the deal. Quote Link to comment Share on other sites More sharing options...
RChrisE Posted December 8, 2014 Report Share Posted December 8, 2014 Terry Fair from Vorshlag Motorsports commented on the quality and effort it must have taken to develop those when he saw your car at Optima Alley (Vegas??). He even linked to your speed.academy article on "another" forum. Good luck with those, they look great! Chris E. Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 8, 2014 Report Share Posted December 8, 2014 Rivets is a solid idea, put me on the list. I'll get a deposit before the end of the month unless others jump in front Quote Link to comment Share on other sites More sharing options...
autotr8er2 Posted December 9, 2014 Report Share Posted December 9, 2014 I know these molds are great quality. The sooner you get them the better they will be. I have the Christmas spenditis as well. Quote Link to comment Share on other sites More sharing options...
Xtreme Industries Posted December 10, 2014 Report Share Posted December 10, 2014 please explain what you mean by trimmed long? are you providing a template for drilling holes and areas to be cut? Quote Link to comment Share on other sites More sharing options...
Convette Posted December 10, 2014 Author Report Share Posted December 10, 2014 (edited) Oh man dude... I'm so torn. I'd like a set but I kind of already did the little brother version of them. Count me as a tentative yes. No problem, I know the timing isnt perfect for everyone with the holiday season. Terry Fair from Vorshlag Motorsports commented on the quality and effort it must have taken to develop those when he saw your car at Optima Alley (Vegas??). He even linked to your speed.academy article on "another" forum. Good luck with those, they look great! Chris E. Thanks man, I appreciate it. Terry is a great guy. Rivets is a solid idea, put me on the list. I'll get a deposit before the end of the month unless others jump in frontThey will be easiest for sure. I will put you on the list. please explain what you mean by trimmed long? are you providing a template for drilling holes and areas to be cut? I'll take some pics tomorrow, basically as you can see the small flat in the picture where they meet the body..that edge will be long so you can fit them to your liking. There will be lines on them where I trimmed mine, but will need to be trimmed and sanded to exact fitment. As every car may be different. As far as cutting your car, thats also up to you... I can post all pics of what I've done here for reference. The holes will not be drilled in the fenders because the hardware will very depending on preference. http://i177.photobucket.com/albums/w239/johnboy9788/IMAG2120_zps9abe9c8c.jpghttp://i177.photobucket.com/albums/w239/johnboy9788/Mobile%20Uploads/IMAG2109_zps3da6ef55.jpg http://i177.photobucket.com/albums/w239/johnboy9788/Mobile%20Uploads/IMAG2148_zpsb26a0438.jpg Edited December 10, 2014 by Convette Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 10, 2014 Report Share Posted December 10, 2014 What material are they made from? Sorry if I missed that elsewhere What did you use to trim them? Quote Link to comment Share on other sites More sharing options...
scottastic Posted December 11, 2014 Report Share Posted December 11, 2014 what did you make them from body man to body man Quote Link to comment Share on other sites More sharing options...
Convette Posted December 11, 2014 Author Report Share Posted December 11, 2014 They are made out of fiberglass. I used a vibrating saw to cut them. Anything will work. You can get one from harbor freight for close to nothing. Quote Link to comment Share on other sites More sharing options...
83stariontravis Posted December 12, 2014 Report Share Posted December 12, 2014 (edited) Would these fit on a narrowbody quest nicely? Approximate added weight? Edit: Or would it trim weight because you are cutting out steel and adding glass? Edited December 12, 2014 by 83stariontravis Quote Link to comment Share on other sites More sharing options...
speedyquest Posted December 12, 2014 Report Share Posted December 12, 2014 It would add weight but are you really that concerned with it? Quote Link to comment Share on other sites More sharing options...
taeisallin Posted December 12, 2014 Report Share Posted December 12, 2014 im gonna have to step up to the plate!! put me down for a set. this will be a nice crown on my 2jz set up!! Quote Link to comment Share on other sites More sharing options...
Convette Posted December 12, 2014 Author Report Share Posted December 12, 2014 Would these fit on a narrowbody quest nicely? Approximate added weight? Edit: Or would it trim weight because you are cutting out steel and adding glass? They could be made to work on a flatty. You would have to build some sort of support bracket for the front lower mounting points...same for the rear. Nothings impossible. Most likely adding weight...but not much.im gonna have to step up to the plate!! put me down for a set. this will be a nice crown on my 2jz set up!!I'll put you down. Quote Link to comment Share on other sites More sharing options...
taeisallin Posted December 12, 2014 Report Share Posted December 12, 2014 Cool. Lmk when u need the funds Quote Link to comment Share on other sites More sharing options...
leesfer Posted December 22, 2014 Report Share Posted December 22, 2014 John, PM me for a deposit. I tried to message you but your inbox must be blowing up coz it's full Quote Link to comment Share on other sites More sharing options...
CarlosFley Posted December 22, 2014 Report Share Posted December 22, 2014 You know man, bump it, sign me up. I will try to scrape together the money as soon as possible. Please text me at 7072673473 so i can keep you updated. Quote Link to comment Share on other sites More sharing options...
Convette Posted December 23, 2014 Author Report Share Posted December 23, 2014 Updated. Sorry about the full inbox. Didn't see it! Quote Link to comment Share on other sites More sharing options...
tankbob Posted December 23, 2014 Report Share Posted December 23, 2014 Just curious because I cant afford this kind of mod but what would it take to make it look like stock but that wide, no rivets just widebody. Quote Link to comment Share on other sites More sharing options...
autotr8er2 Posted December 23, 2014 Report Share Posted December 23, 2014 What's the deadline to get the deposit in? Quote Link to comment Share on other sites More sharing options...
needsq Posted December 28, 2014 Report Share Posted December 28, 2014 Put me down, deposit sent. Quote Link to comment Share on other sites More sharing options...
Convette Posted December 28, 2014 Author Report Share Posted December 28, 2014 Ok guys going to update this as soon as I get to a computer. I've reached my limit on these now and it I will NOT be taking any more deposits as of today. This is not to say I won't be making more, just not at this time. Autotr8er2, I will pm you later. Tankbob, a real body man could adhere these and blend them back in for a cleaner look. I'm out of town for the holidays and getting these out will be priority as soon as I get back. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.