slowspyder

I need a crank pulley and a power steering pump pulley shipped to los angeles CA

I need a good crank pulley and a power steering pulley preferrably out of either the 88 or the 89

The thermostat will start to open at what its rated at. It fully opens about 20 degs above what its rated at. So a 192 deg thermostat begins to open at 192 and fully opens at 212.

A/c override switch

Whats the thickness of the pipes? Id be careful about about bolting a bracket from that header to the motor mount. While the manifolds gonna expand and contract, the part attached to the motor mount wont as much. Eventually somethings gonna break and its probably going to be that plate with the bolt.

Good guy to deal with. +1 for feedback

How much for both front left/right spindle/strut housings (no shocks/springs/upper hats) shipped to 90042 los angeles?

That is correct!!! with that rubber gasket too!!

Nothing wrong with a 3/4 wire heated o2 sensor right after the turbo. Alot of oem turbo cars have a heated o2 sensor right after the turbo.

That flange that bolts to the downpipe should be threaded for an o2 sensor. Atleast mine was.

I need the pick up tube that bolts to the fuel tank. Let me know a price shipped to Los angeles 90042

I need the alternator and plug with about 6" of wire. Preferrably out of the 88

Hey scotty, do you have this radiator installed in you car? I like to see pics if you do

Whats the shape of the connector on the alternator? T or oval?

Are you measuring lip to lip? If you measure from lip to lip the stock 7" wheels measure 8" and the 8" wheels measure 9". Just show a picture of the back. It will tell you the size of the wheel behind one of the spokes.