Minagera Posted February 1, 2012 Report Share Posted February 1, 2012 (edited) I have a custom MPI intake for sale. It is setup for (8) injectors, a standard Ford TB, and has holes drilled on bottom where nitrous was fitted. **Can get the holes welded shut.** The fuel rails have AN fittings, however I do not know their size. I have not personally run this intake, however it was run and went in high 8s with the setup pictured below. I do know there is no provision for a thermostat on the intake right now, it is setup for an inline thermostat. Also the TB Flange was machined for an O-Ring to fit between the intake and the TB. Looking for $700 Shipped OBO. Will accept cash\trade for a firearm(s) (I know this limiting in some states). Nothing really specific. Contact me via PM, Email (minagera at gmail.com) or text\call 256 five zero eight 9819. http://minagera.org/gallery/var/albums/Cars/Conquest/Random/Intake_Setup.png?m=1323440785 More Pictures - https://plus.google....=CID_nIWulN7TfA Regards, Matt Edited February 5, 2012 by Minagera Quote Link to comment Share on other sites More sharing options...
89BananaQuest Posted February 1, 2012 Report Share Posted February 1, 2012 Omg! I wish i had money for this. Amd do u have more pics of the black car? Thats insane! Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 3, 2012 Author Report Share Posted February 3, 2012 Bumping. Shoot me offers. Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 5, 2012 Author Report Share Posted February 5, 2012 I know someone wants this hoss. Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 15, 2012 Author Report Share Posted February 15, 2012 Last bump before I put it back in the closet. Quote Link to comment Share on other sites More sharing options...
neverfastenuff87tsi Posted February 15, 2012 Report Share Posted February 15, 2012 Will this clear the brake booster Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 15, 2012 Author Report Share Posted February 15, 2012 Will this clear the brake booster Yes it should. Quote Link to comment Share on other sites More sharing options...
neverfastenuff87tsi Posted February 16, 2012 Report Share Posted February 16, 2012 Do you think that intake could be made to work on the street Quote Link to comment Share on other sites More sharing options...
Chad Posted February 16, 2012 Report Share Posted February 16, 2012 no, it won't clear. the edge of the brake booster is centered on the #4 runner. Unless the runners are extremely short, or tilted forward a lot, the plenum will hit the booster. Measure the center of #4 to the edge of the booster, and you will see how little clearance there really is there. then get a measurement on that manifold at the same location, from the looks in the pics, there is a conflit there. Also looks like it gets in the way of the AC system. Quote Link to comment Share on other sites More sharing options...
neverfastenuff87tsi Posted February 16, 2012 Report Share Posted February 16, 2012 Thanks chad, if you come across one of these that will work let me know, dads building a long block for me and i'm trying to find an mpi Quote Link to comment Share on other sites More sharing options...
Chad Posted February 16, 2012 Report Share Posted February 16, 2012 Have Minagera take some measurements for you, it may be an optical illusion. I seem to recall there is about 9" between the edge of the booster and the head flange. that intake seems to be about 10-1/2" from the looks of the pics. It might be a simple modification of the plenum and it woudl fit. Quote Link to comment Share on other sites More sharing options...
Dodge2004srt4 Posted February 16, 2012 Report Share Posted February 16, 2012 I wish it was easier to run MPI as I would buy this in half a heartbeat. Sadly I dont have THAT much money or time to set everything up. GLWSChris. Quote Link to comment Share on other sites More sharing options...
neverfastenuff87tsi Posted February 16, 2012 Report Share Posted February 16, 2012 Hey Chad, if this would fit do u think this could be used on the street, probably have to weld 4 of the 8 injector bosses up Quote Link to comment Share on other sites More sharing options...
Minagera Posted February 16, 2012 Author Report Share Posted February 16, 2012 Could it be run on the street, yes. Your injector size and how you have them setup in your standalone is what will be the determining factor on that. No the A\C will not work with this intake without some moderate to hevay modification, to the point it would be better to start over. I still will maintain it will clear the booster, and I do plan on putting it on a vehicle if\when I pull the engine this weekend. Until then i would appreciate the speculation to cease. Quote Link to comment Share on other sites More sharing options...
Chad Posted February 16, 2012 Report Share Posted February 16, 2012 the booster is 6-3/4" from the center of the number 4 runner. That is not speculation. Unless the intake is shorter than that, it's going to hit the booster. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.