waynewl34

I am looking for a fuel injection system MSQ FIP for the conquest prefferably wih ignition controller used but I need everything to install it thanks Wayne 443-677-2963

I have several parts for q quest tha I am doing a v8 swap automatic trani works goo with shifter and linkage 200.00 intercooler and hoses and pipes stock gage cluster distributor some marroon interior pane;s marroon dash pad good shape various other motor parts just ask me for something and I will email you a price thanks

[i have one I am in shrwesbury pa low miles works just pulled for a v8 swap

HI i got a good set and many other parts wayne

HI thanks for the reply about the 5.0 cmoputer harness when you get the connections let me know also what did you do about the drive shaft u am trying to get it done befor I get tha motor back from the machine shop. what u joints etc thanks wayne WAYNEWL34@YAHOO.COM

HI, good job . can you tell me how you wired the 5.0 harness and charging system up what wires from the 5.0 harness did you have to use and where did you have to conect them I am putting a drive train out of a 86 mustang gt in mine I have all the wiring from the mustang. I already had this in my othe quest that I sold but I dont remember the connections anyhelp would be appreciated my email is WAYNEWL34@YAHOO.COM

HI I tried to email you but the email seem to not work what are you asking for the quest thanks Wayne 443-677-2963 email waynewl34@yahoo.com

HI guys Heres another one for sale Below is my listing on ebay You can also view the car in my albus it's the blue Quest http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=320304242739 You are buying a unmolested 1989 Conquest. The car is Stock It has 125,000 plus miles on the car. The Transmission was just rebuilt 2 days ago and is the factory automatic with overdrive The quest is a TSI with the factory SHP (special Handling Package) The car has a little rust at the LR lower quarter panel in front of the wheel not actually on the quarter nothing major it also had a small rust spot on the right frame rail that was repaired with channel steel. The left frame rail has a little surface rust when the undercoating was scraped off. ( I will be grinding that off and re undercoating it. over all the body is in very good shape and solid. It should have the right door hinge replaced it's a little week. ( Ihave one and if I have time I will replace it) all the lights and gages work. the power antenna is broken because one of my kids was playing with it. The Tires and Brakes a good and it drives fine and the air Works but needs charged. I have replaced the Valve cover gasket this week just for maintenance and the motor is spotless under the cover and looks like new, I also replaced the main oil seal while the trani was out even though it did not need one. the turbo spools fine and the car itself Runs Very good. The interior is in very good shape as you can see. I can see a very small bubble in the front driver seat but it is not ripped. carpet is good other than me having to clean it for that matter I have to clean the whole car it,s very sharp when clean. It does have a small crack in the lower air dam as you can see but it can be repaired easy. This car has the factory SHP and it's rare that you see the TSI Automatic with SHP all in one I have owned several of theses cars and I usually buy them to put V8,s in them but this car is to good for that right now If you have any questions email me and i will try to answer you back as soon as i can Good Bidding

I saw it too I live in shrewsbury it,s pretty rough lots of rust and beat to death

check my listing out on ebay http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=320304242739 call if interested wayne 443-677-2963

I have one check it out on ebay call me if you are interested wayne 443-677-2963 copy the link below and go to the listing http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=320304242739

This is a insert from my ebay listing copy this link to get to it with the pics http://cgi.ebay.com/ebaymotors/ws/eBayISAP...em=320305220174 I recently bought the car to finish the V8 Transplant that was started but then I found another quest that is black and I decided to use that one for my mopar swap instead beacause I like black and the paint work would be easier. Anyhow now up for sale is this one. The body is very strait and there is no rust under the car (thats why I bought it) the only spot of rust that I see it the lower right back rocker panel as seen i n the picture. The car is solid. As you see a motor swap was started with a 302 The motor mount towers on the fram have already been notched for the motor, all you have to do is get the 93 mustang convertable motor mounts and then you can put a 5.0 in it. The motor that is in it comes with it but it was used for installation help only. It did run but you dont want to use it. Get a good 5.0 The lower air dam is in the trunk and has couple cracks on the sides like most of the others I see but can be fixed. The interior is preety good to other than being dusty. the driver seat has a rip as you can see. The driver door window needs to be put on the new track that I have, I might have time to do that , if not you can The car will come with the 4 factory quest wheels and the tires are pretty good. The weld wheels you see do not come with it, but i would condier selling them for the right price. They where special made for the car. The intercooler is still in the car. Also there is a crack in the winshield that you should be able to see in the picture. I have described this car to the best of my ability and it is being sold as is The Buyer is resposable for pickup I will assist in any way I can. I can deliver if within 100 miles for fuel and time Call Wayne 443-677-2963 shrewsbury ,PA 40 minutes north of Baltimore

HI please call me Wayne 443-677-2963 where are you located

do you still have it wayne I am in shrewsbury pa 443-677-2963

check mine out on ebay I am about 2 hrs from you in Pa item# 320300089489 wayne 443-677-2963