And completely stock under the hood
Since Then I have been modifying and fixing and upgrading almost everything.. heres some more pictures along the way
Deleted some and replaced all other vacuum lines and new coil
Cosmo Racing open air filter for stock MAF and deleted some emissions junk
Painted some intercooler pipes, etc. added magnecor plug wires (going with a red and silver theme)
Bought some Motocam 360 Hood Struts from Tim E. and got the chrome OVCP I've been looking for. Came with a cheap HKS bov but it worked good.. I already had a brand new SSQV 4 so I will install that later
Then I bought a super rare 160 MPH gauge cluster from a member on here.. came out of a 1984 Ukraine Starion I believe.. I used the speedo, green boost gauge (which I have never seen before), and the oil pressure gauge (mine was broken).. not a huge fan of the maroon interior.. someday ill swap out for black.
Also replaced the old clutch that was starting to slip with a Spec Stage 3, its a 6 puck sprung disk.
Bought a MK1 3in exhaust too.. straight through to muffler.. big difference (not in pic yet)
Then I bought a Super 16G turbo, Delphi injectors (650/950) and a few other goodies so I wanted wideband and fuel pressure gauges.. my custom pillar mounts turned out pretty good I think.
With the gauges installed.. I went with glow shift gauges.. all electric with ten colors and programable options
I think my car runs a little lean, and my fuel pressure is kinda low. Im waiting for my Trilogy Turbos Adjustable Fuel Pressure Regulator.......
Installing the S16G.. went pretty smooth.. pulls hard once its spooled up
All installed with the lower shores performance oil and water feed/return lines.. running good.
ABS and A/C deleted..
Then recently I tucked some wiring away and relocated a few things to clean up the engine bay..
Also got a new SS intake pipe and the other hard pipe around the air filter
Its looking better and better under the hood every time I work on it
Thats how it sits now and I have more parts on the way right now.. (polished VC, strut bar) so i will update once I get them and get them installed.
Thanks for looking guys, hope you enjoy!
P.S. any pointers or tips are greatly appreciated!
Edited by '87quest, 27 August 2014 - 10:33 PM.