Jump to content

Gz21

Members
  • Posts

    52
  • Joined

  • Last visited

Profile Information

  • Location
    Pittsburgh, PA

Contact Methods

  • ICQ
    0
  • AIM
    GroundZ21

Gz21's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. Thanks chip. Just sent you an email from gz21@excite.com Craig
  2. I have 65lb/hr injectors and have the boost set to 15psi. Before the MPI, the car seemed to pull alittle harder up top. Not all the way to redline but more then it does now. It is not rich, when on boost the car is typically between 12:1 and 13:1. I think that is pretty much where it needs to be. I thought the "c" wheel turbo lost efficiency over 15psi? That is why I have never had it set any higher.
  3. No problem. I am not really in a hurry. Just started playing around with the car again and I would just like to compare another map. I am wondering if that could be some of my problem on the top end. I haven't seen anyother hawk maps to compare.
  4. That just seems like to small of a turbo for MPI. I have a 17c and the power seems to fall off above 4000-4500RPM. I have been thinking about changing to a bigger turbo unless there is something I am missing in tuning it. Chip, is there any chance you could post your ignition map? I have the Hawk as well and I would like to compare it to mine. Thanks, Craig
  5. http://www.26liter.us/gallery/albums/userpics/10020/Mvc-008f~0.jpg
  6. Here is their website. http://www.efihardware.com/efi_ecu.html
  7. The first one is sold. Second with bolt location broke is still available. It does not really that bad. Alittle sanding and it would be blended in so you would never see it.
  8. Shipping is approx $15. So lets just go with $50 shipped for both. How does that sound?
  9. I have two of the mitsu valve covers for sale. One is perfectly fine and the other only has the one bolt location for the timing cover i belive on the FWD engines that was broke off. See second pic. It is just at the surface, not through the cover. $20 each plus shipping? I want to get rid of these as I have had them sitting around for a couple years. http://www.26liter.us/gallery/albums/userpics/10020/Valve_Cover_2.JPG Two pics of the one with the bolt location broke. http://www.26liter.us/gallery/albums/userpics/10020/Valve_Cover_1-2.JPG http://www.26liter.us/gallery/albums/userpics/10020/Valve_Cover_1-1.JPG
  10. If you want to use the hall effect style you need to swap the wire from the A2 pin. I talked to the guys about this too and that is what I was told to do. The gray boxes you see are the shields that are on those wires. They are tied into the ground wire that go to the pickups. I can help you on wiring up the dizzy but I dont have the information in front of me. I will get it in a few days and post if for you. Craig
  11. count me in as well for a +80% and a performance street disc
×
×
  • Create New...