Jump to content

Fuel rail pressure Gauge parts information


importwarrior
 Share

Recommended Posts

Provided by:

Preludedude

 

Link Reference to the original post for more information:

http://www.starquest...ic=148972&st=20

 

 

There is no adapter for 1/8" NPT female TO 1/4" BSPT male..

 

IT HAS TO BE TAPPED...

 

This what I purchased today...

 

Northern Tool store: 1/4"-18 NPT tap...cost $8

 

http://i1221.photobucket.com/albums/dd461/Preludedude1/photo%201_1.jpg

 

The fitting come from Hydradyne..its a store with fittings for hydraulics/etc...Cost only a dollar or two...I is a 1/4" NPT male TO 1/8" NPT female...My 1/8"npt elbow fits right into it...

 

http://i1221.photobucket.com/albums/dd461/Preludedude1/photo%202_1.jpg

 

Now I need to remove the fuel tophat and tap it...Ill post back in a few days with pictures when its all said and done...

Link to comment
Share on other sites

Hydraulic hose stores usually have the unusual sizes we need.

 

BSPT Adapter so you dont have to tap the hole.

 

1/4 BSPT to Female 1/8 NPT maybe they have it.

 

http://www.discounth...CFQcTHwodbfsCWQ

 

http://www.discounth...male_p/9035.htm

 

 

this looks great!

http://www.discounth...male_p/9042.htm

Link to comment
Share on other sites

Provided by:

 

AKNorthStar

 

possible problem is that with this design and or configuration the gauge might hit the strut brace cross bar.

 

the 90 degree fitting its like 5$ at parker store 1/4 male to 1/8 female

 

http://i1321.photobucket.com/albums/u546/cjhippie/Mobile%20Uploads/2015-08/20150818_205432_zpsravfkjut.jpg

Link to comment
Share on other sites

 Share

×
×
  • Create New...