SOTTY Posted March 3, 2014 Report Share Posted March 3, 2014 (edited) Hello peeps , spoke to MJa at Mookie a while back about making their excellent crank pulley with edis trigger available again to us as i know a few of us are in need of this item .He kindly sourced me one a few weeks ago and low and behold ! he now has another 10 available on his website along with the sensor bracket and dizzy plug , get em while they last ! Edited March 3, 2014 by SOTTY Link to comment Share on other sites More sharing options...
randy Posted March 3, 2014 Report Share Posted March 3, 2014 Great info there. Link to comment Share on other sites More sharing options...
G54BT Posted March 3, 2014 Report Share Posted March 3, 2014 Hi, can I get Mookie's web site address? I've been out of the 'Starion World' for a bunch of years. Thanks! Link to comment Share on other sites More sharing options...
CaliConquestAlex Posted March 3, 2014 Report Share Posted March 3, 2014 Anyone looking to go MPI should pick up these pieces. I have all of them and the fit and finish is excellent. Makes the conversion to EDIS or COP so easy because these are the only hard parts of the conversion. The only other parts like coils and such are easy to source and wire up. Link to comment Share on other sites More sharing options...
creakyjoints Posted March 3, 2014 Report Share Posted March 3, 2014 Actually just ordered the plug from him Sunday! Link to comment Share on other sites More sharing options...
randy Posted March 4, 2014 Report Share Posted March 4, 2014 I saw the bracket but not the plug. Link to comment Share on other sites More sharing options...
creakyjoints Posted March 4, 2014 Report Share Posted March 4, 2014 There up on ebay. Also got some rear camber plates. Link to comment Share on other sites More sharing options...
randy Posted March 4, 2014 Report Share Posted March 4, 2014 gonna take a peek again. Link to comment Share on other sites More sharing options...
button Posted March 4, 2014 Report Share Posted March 4, 2014 (edited) Here is his store:http://stores.ebay.c...=p2047675.l2563 Plug:http://www.ebay.com/...=item58acaec281 Pulley:http://www.ebay.com/...=item20e098c48c Bracket:http://www.ebay.com/...=item255ba579cf Sensor:http://www.ebay.com/...ab845a2&vxp=mtrBWD Part No. CSS12PBWD Part No. CSS12PSTANDARD MOTOR PRODUCTS Part # PC19TSTANDARD MOTOR PRODUCTS Part # PC19AIRTEX / WELLS Part # 5S1739AIRTEX / WELLS Part # 5S1740 Pigtail:http://www.ebay.com/...edd9f99&vxp=mtrDorman Part # 49813STANDARD MOTOR PRODUCTS Part # HP4710AIRTEX / WELLS Part # 1P1258 {#3U2Z14S411SMA, 626}MOTORCRAFT Part # WPT579 The sensor and pigtail are for a 1998 Ford Escort with the 2.0L SOHC Edited September 8, 2015 by importwarrior Link to comment Share on other sites More sharing options...
SOTTY Posted March 5, 2014 Author Report Share Posted March 5, 2014 Awesome Button ^ thanks ! Link to comment Share on other sites More sharing options...
CaliConquestAlex Posted March 5, 2014 Report Share Posted March 5, 2014 Great info. Too bad I don't see any of the red crank pulley listed. Link to comment Share on other sites More sharing options...
randy Posted March 5, 2014 Report Share Posted March 5, 2014 Great info. Too bad I don't see any of the red crank pulley listed. Powder coating is an option if red is a must. Link to comment Share on other sites More sharing options...
randy Posted March 5, 2014 Report Share Posted March 5, 2014 Anyone useing the cam degree sprocket also from mookie,or just the stock one? Link to comment Share on other sites More sharing options...
SOTTY Posted March 6, 2014 Author Report Share Posted March 6, 2014 Great info. Too bad I don't see any of the red crank pulley listed.Only available in blue , take what ya can get at this point . i'm guessing this is it , no more after this. Link to comment Share on other sites More sharing options...
CaliConquestAlex Posted March 6, 2014 Report Share Posted March 6, 2014 I have the adjustable cam gear. It's a nice piece. Link to comment Share on other sites More sharing options...
STARION_NORTH Posted March 16, 2014 Report Share Posted March 16, 2014 Great info. Too bad I don't see any of the red crank pulley listed. I have an unused red crank pulley but would prefer a natural aluminum finish, maybe we can help each other out? Link to comment Share on other sites More sharing options...
SOTTY Posted May 18, 2014 Author Report Share Posted May 18, 2014 2 crank pulleys left in blue , get em while they last ! Link to comment Share on other sites More sharing options...
Recommended Posts