AGC

It was great to see all the Questers that showed up, New faces, and the Old. It was great to finally meet Shelby after all these years ;-) There sure was some Awesome Quests to gawk at. :-D

The pits in the Piston tops and edges looks like Detonation due to lean conditions.

I PM'ed you on this.

Do you have the Door Lock Relay for the 86?

Dad's the man! I rebuilt my engine twice since Christmas(broken pistons from detonation)and Dad had everything I needed, plus hard to find Oem items with excellent prices and shipping

Hey Guys, I'm looking for an 4-speed Quest Widebody. No Engine or Tranny no problem. Must have good Cab and Rear. Fenders, hood, front ends, can be replaced, but I don't have the ability to replace Quarter panel etc. Please, no Rust Bombs. I live in Houston, TX but willing travel somewhat for a good Quest.

WTB 86 Door Lock Relay, and Connector if possible, but not mandatory. 86 ETAC unit. Will pay generous price, and/or trade items from 88 Auto parts. AGC

I have a Stage 2 240mm Composite Kit with about 1k miles. Worked great never slipped...and I drive super hard. I Switched to a Stage 3 6-puck, only because I had a brand new one and wanted to see the difference between the 2, and never went back. I thought about going back to it because the Stg. 3 grabs hard on takeoff for a daily driver...but I've gotten use to it by now. $130 Shipped........unless you live in Tokyo; BTW I'm leaving to go work Offshore 5/15/10 (Saturday), and will be back on land 3 weeks later if your interested. AGC

Yea I know what you mean. I have a leaking 5-speed(input shaft seal housing). I pulled my 5-speed 6 times in 3 weeks and still couldn't stop the leak. I hate Gear Oil I have (4) 4-speeds in the garage that I can't use because the 86 tunnel is to narrow to house the 4-speed. It's good to see you guys embracing the 4-speed. I never imagined going back to the 5-speed, but I just couldn't resist owning an 86 with 64k miles(now 93k due to daily driver). BTW HI GUYS!!!!! I've been away for awhile doing secret service Quest mods......just kidding Actually, I went Hurricane4, EDIS, Megasquirt2 v3, then (2) broken and (1) 2" dia burnt pistons Seems like some of you guys have done the 4-speed mod with good results. Just remember to set your(2)Brake Bands(torque to 132 in/lb Caution!!! NOT FT/LB. after installing a modded C/B. I know it's been a long time since the mod release, but last week, I noticed an error in one of my diagrams. The placement of the Pressure Modifier Shim needs to be between the Spring and the Valve, not behind the Valve. It won't (if installed incorrect)cause any damage, just decrease shift firmness...regardless of 1,2 or 3 Stages. Anyway, I'll be around more often now, and be happy to help if I can, with any 4-Speed, MPI, Megasquirt2, or EDIS questions. Keep in mind, I'm not a 4-speed Guru, but I've learned somethings from Shelby and NOTAV6. KEEP UP THE QUEST!!! AGC

I had to visit my Sons Aunt close to the Area, so I did that first and got hung up later than intended. Yea swing on by. I'll PM my info. Thanks for the lead

I rolled by about 10.30 and noone was there BTW anyone know of a good Machine Shop in H-Town to get my Block bored?

Well, after fighting the Rain and Kids Birthday party I finnaly tore my Block down only to find a cracked Piston and a scratched #2 Cylinder. I have to machine and buy new Pistons to get my Quest online. But, I would still like to meet you guys and hangout....I'll bring the Spirit of my Quest in the form of Pics

Kewl, I'm in! Got to do a Ring job on my Quest or,... I could kill all the Mosquitoes with my "James Bond" smoke screen hahahaha. I'll do my best Guys to make the Meet.