Jump to content

QUICK MSD BLASTER COIL QUESTION


Recommended Posts

the injector resistor? you sure you don't mean those two noise filters attached to the coil? You like alternator noise in your speakers? How about that electrical noise in the car wiring going back to the ecu? leave them alone they were put there for a reason and if you removed the resistor pack for the injectors they are going to fry now, our stock coil isn't one that requires an external resistor that's one of the reasons its printed on the side, " for electronic ignition " and MSD sells more than one type of coil
Link to comment
Share on other sites

the injector resistor? you sure you don't mean those two noise filters attached to the coil? You like alternator noise in your speakers? How about that electrical noise in the car wiring going back to the ecu? leave them alone they were put there for a reason and if you removed the resistor pack for the injectors they are going to fry now, our stock coil isn't one that requires an external resistor that's one of the reasons its printed on the side, " for electronic ignition " and MSD sells more than one type of coil

 

indiana, the blaster coil comes with a big ballast resistor. all the ones that came on the car are still on the car. and, i couldnt remember if the blaster coils needs the resistor for our cars, as i've long lost the instructions for the coil.

Link to comment
Share on other sites

 Share

×
×
  • Create New...