nicksquest Posted August 2, 2010 Report Share Posted August 2, 2010 well, i know this is asked alot cause it is in the FAQ's but there is no pic to go buy. can some one please post me a pic of what the 87 setup should look like when it is done so i can see if i did mine right. she is running like sh#t now. i have the EGR ports plugged but should i just take it of?? maybe this is my problem?? i will take it off and make a plate for it tomorrow. please some one post a pic or kick me where there is one thanks guys!!in fact here is a video of what i have done: http://www.youtube.com/watch?v=fs73zhtO-30 Link to comment Share on other sites More sharing options...
importwarrior Posted August 3, 2010 Report Share Posted August 3, 2010 (edited) i think this might help! Click ME! http://i139.photobucket.com/albums/q299/I-W/Quest_Parts_and_Info/Mani-Vac-Ports.gif in the vac pic above.dont mess with the #4 just leave it. block off ~ cap #3boost gauge to #2 also T off it for BOV.EGR, i jut cut a coke can up and actually folded it in half so it was double thick. then used an EGR gasket to measure and trace an outline on the can then cut it to size and blocked off the egr. hope this helps. Edited August 24, 2010 by importwarrior Link to comment Share on other sites More sharing options...
Recommended Posts