Jump to content

16x10 All Around


Recommended Posts

WIll 16x10 -27 offset wheels fit on our widebody cars? I found a wheel I really like by the only size that are 16's is 16x10 with -27 offset all around.

 

EDIT: Offset is -27 not -33.

Edited by GINASQ
Link to comment
Share on other sites

http://www.starquestclub.com/forum/index.php?showtopic=136636

 

Do the math with the info in there, and you'll find that the rears will likely fit, but probably not the fronts.

 

What's the goal here? Are you going for looks, or performance? I'll also warn you that finding tires for that size will suck if you're not going for a stretch fitment.

Link to comment
Share on other sites

If you're attached to these wheels, you're going to probably need to do some work. You'll also probably need a stretch tire fitment - I didn't find anything in the normal sizes to fit that tire in a quick search.

 

Typically I see wheels in that size/offset going on lifted trucks. My advice? Find a tire size you like and then find wheels to fit the tires if you're truly looking for performance.

 

http://www.tirerack.com/wheels/tech/techpage.jsp?techid=101

 

^ That explains offset halfway decently. SHP 9's are 9" wide (duh) with a zero offset. You can pretty well fit an 16" x 10" in the back on stock suspension at 0 offset. Anything much larger or much different offset will require fenders rolled or camber adjustment with stretched tires.

 

Fronts are a little trickier since they turn and you need to clear steering components and whatnot.

 

As a general rule of thumb, you can usually go an inch larger than stock in all directions except inwards on stock suspension. Beyond that you get into a whole bunch of variables and much more work.

Link to comment
Share on other sites

Damn I'm looking into it and it really is hard to consider them for the fronts. Might have to go down to the 15"

 

15"s will limit your "performce tire" selection..... if your really going for performace your going to want to step up to a 17 maybe even an 18 as tires for 17's will be going the way of 16's in the next few years.

Link to comment
Share on other sites

My good friend has no problem finding tires for both his 930's one all track car the other his dd. One with 16x9/10 and 15x9/10 the other is something else (cant remember). I know he runs Kuhmo and toyo and bfg. Edited by GINASQ
Link to comment
Share on other sites

  • 2 weeks later...

I know what tires I can find I can get tires for the wheels. Just wondering if the wheels would fit the car. Which seems very not likely. I'll just put the wheels on something else.

 

Please show us these magic tires.... especialy where I can select the compound I want.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

What are you saying? Magic?

 

I'm saying the tires do not exist...... Tire makers for the most part have 100% stopped making tires wider then a 225 for a 16" rim..... soon 17's will be going the same way. Other then a few race compound and a few cheep junk off brand tires, there are almost no tires wider then a 225 for 16" rim. And when you do fine one here or there they are 1 or 2 of them and they are old. I want to run something with a dot date within the last 2 years max.

 

I would like you to show me a source for 16" tires in wide sizes so 255 265 285 295 305 with my choice of maker, diffrent tire styles, and choice in compound the tires are made of..... It does not exist, and has not for quite a few years now. The law changes on imported tires also put a major damper on this a few years ago also.

Edited by jszucs
Link to comment
Share on other sites

Whoa lay off, I didnt say the choices were big. I said, "I know what tires I can find I can get tires for the wheels. Just wondering if the wheels would fit the car".

In other words, I know the selection of tires for that size but I'm asking if those wheels would fit the car.

 

In the post before I stated the tire brands. Nowhere did I say there was a big selection and a selection that was that wide as far as tire specifics.

 

As far as your last request and what you're asking me. It's completely unnecessary to ask that since I never stated that that was a task that was easy.

 

I would like for you to acknowledge that you understand what I am saying in this post. So we can no longer make long drawn out post about your assumptious misinterpretations of what I clearly typed. And if I was not clear, please state that so I can clarify or edit my post to general understanding.

Link to comment
Share on other sites

I though it was just common knowledge that anything wider then a 225 for a 16" rim is no longer made other then a few competition compounds, old stock (old enough at this point you don't want to run them), and slicks. And we still have not seen the source. Yes they could be made to fit but are going to stick out with a - offset and that is not like a + that you could just soak up with a spacer. So looks wise not my cup of tea (will stick out like upgraded rims on a flat sided jeep), and geometry wise out of wack.
Link to comment
Share on other sites

 Share

×
×
  • Create New...