Jump to content

First 1/4 run fun


Skullzaflare
 Share

Recommended Posts

First run I ran a 13.46@101mph, 2nd pass 13.49@101mph, 3rd wastegate tube came off and broke up 15.1, 4th pass 13.39@102, final pass 13.33@107

All 60ft right around 1.86-1.89

Standard Firestone 225/50 rear tires

No spinning leaving at 3500

Link to comment
Share on other sites

those are good 60's for standard street tread. On those tires, its best not to spin much because they cant recover like a drag compound.

 

107 is good for 12's. Whats the setup details?

Link to comment
Share on other sites

those are good 60's for standard street tread. On those tires, its best not to spin much because they cant recover like a drag compound.

107 is good for 12's. Whats the setup details?

Did a light 1st gear burnout

Ebay t3/t4 52/76mm

Stock bottom end, Njv head with 1mm os ss valves, heavy duty springs, 294h cam with mechanical rockers

Running stock intake manifold, 2 green injectors, Ms1 3.57 on coil pack. 17psi, stock gears

Link to comment
Share on other sites

looks good! with times like you posted, if i get this new turbo on and safc2 hooked up, i should be in the 13s no prob! i am very similar in mods to yours, stock cam though.

i didnt use a junky safc, i used a megasquirt, full ignition timing, im on coil pack not distributor

Link to comment
Share on other sites

Sure I did last year. It went 12.70's at 113 with a 2.1 60' and tranny that shifts like a lawn tractor.SQR is my witness! If no one buys it I might bring it again. I've honestly lost intrest in it though. I'm enjoying my mustang much better. Ac and boost is a wonderful thing.
Link to comment
Share on other sites

Sure I did last year. It went 12.70's at 113 with a 2.1 60' and tranny that shifts like a lawn tractor.SQR is my witness! If no one buys it I might bring it again. I've honestly lost intrest in it though. I'm enjoying my mustang much better. Ac and boost is a wonderful thing.

is that on your mpi setup?

Link to comment
Share on other sites

Hey Skull, why you sellin your stuff?

idk what im doing yet, fpr hose came off when the wastegate hose came off and blew 2 ringlands (found out 2 days later after it got worse)

i ordered a set of pistons after finding out my block was 30 over and the std set of extras i had didnt do me any good

i didnt have the money to order pistons, so i decided i was done for a while. idk what im doing right now

Link to comment
Share on other sites

Well, what are the pistons you ordered? I have a used set of dished wiseco's that might be able to help you out. ;)

Are they 30 over? I ordered a cheap set flat tops with chrome rings, just to get the car running, it's been down for 2 weeks, and I've been borrowing cars

Although I do have a standard block but it needs a crank, oil pump, and rods (only got 3)

 

Also, not to rub salt, but did you "bell" ( =< ) the vac port and ziptie it or was it just slid on?

 

I bell and zip all vac ports for this exact reason.

I've never belled anything however everything is super glued and zip tied

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...