White '87 Starion - 2JZ/V160 swap
Posted 10 June 2019 - 04:16 PM
Location: Tampa Florida
25.5 roll cage - X in roof - 7.50 cert.
Dual Stroud parachutes
Dual driveshaft loops
1983 Starion tail lights
New paint on hood, rocker panels and 3 piece rear spoiler
Airdam, bumper cover and the metal bumper support were new when i installed them in the last few years
Windows were just tinted several months ago. I believe they're 35%.
Driver and passenger Kirkey seats and black seat covers
Simpson 5 point harnesses
Autometer Cobalt tachometer, Speedometer, 45psi boost, water temperature, oil pressure, volt meter, and fuel level gauges.
Aem Uego air fuel gauge
Custom aluminum door panels with integrated window switches
Battery has been relocated to the trunk.
Stock trunk area has been cut out and replaced with a flat piece of aluminum. Stock fuel tank is still in place and a custom mount was made.
Front big brake kit with wilwood calipers
Rear cross drilled rotors
Stainless brake lines
D2 coil overs
Front and rear adjustable camber plates
Boxed in front control arms
Poly front control arm bushings and strut rod bushings
Poly diff mounts and rear control arm bushings.
Driveshaft shop pro series axles
Rebuilt v160. Came out of Jess Barton's old Supra that ran deep into the 8s.
Clutchmasters triple disc clutch
Driveshaft Shop carbon driveshaft
Shark Fab t4 manifold with dual Tial mvr wastegates
Tial Q bov
Precision 7685 turbo
Powerhouse 5" intake pipe
Sleeper Designs billet intake manifold
Nitrous Express direct port system
Bosch 044 at stock tank
Weldon mechanical cam driven pump
1 gallon surge tank in engine bay
Headgames pocket port
Kelford T202D cams
Powerhouse cam gears
Ferrea dual springs, titanium retainers, valves and locks
Real Street RS1600
Turbo Tuff rods
Billet main caps
New oil pump, water pump, all gaskets and seals.
Crower oil pump gear
Ati crank pulley
Powerhouse pulley kit
Aem v2 ECU
Aem iat, 5 bar map, fuel pressure and oil pressure sensors
Weld RTS wheels
Mickey Thompson 26x10.5 slicks
I had this car list for sale a few years ago, but i had some motor issues shortly after. The set up has changed a lot since then. I purchased everything new all over again. All parts now have less than a few hundred miles on them.
The car is located in Tampa Florida right now. In a month or so, it will be back in Maryland.
Im asking $40k or best offer. I have well over $75k in receipts from the last three years.
Pictures will be up shortly. Im 1500 miles away from the vehicle, so if you request pictures of certain items, it is going to take me a few weeks.
Posted 11 June 2019 - 05:10 PM
Posted 11 June 2019 - 08:20 PM
Maybe if you could enjoy it, you'd keep It.
Posted 11 June 2019 - 08:23 PM
Edited by gtxthunder, 11 June 2019 - 08:25 PM.
Posted 12 June 2019 - 10:22 AM
Posted 12 June 2019 - 07:00 PM
Ah i didnt know if parts were ever found. I remember they found it fully stripped which sucks cause that car had a lot done to it.
Posted 14 June 2019 - 09:16 PM
Posted 16 June 2019 - 01:03 AM
Posted 16 June 2019 - 04:25 AM
Posted 17 June 2019 - 09:05 AM
Posted 22 June 2019 - 12:36 PM
Posted 24 June 2019 - 08:55 AM
F N Awesome
Posted 06 September 2019 - 04:29 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users