no1nzsafe

PRICE DROP $3,500

I am posting for sale, my 1987 Chrysler Conquest TSI. 113,000 on the clock but...... There are alot of aftermarket performance mod's done: Completely performance built motor 3,000 miles ago. high compression pistons, shot peened rods, ceramic bearings, new timing chain, new valves, copper head gaskets, and ported and polished head. new wastegate, (turbo is stock, but perfect) new cap, rotor, wires, new starter, new alternator, high rate fuel pump, turbo XS blowoff valve and crosspipe new TPS and idle controller. car NEVER runs hot. barely hits middle of gauge in hot weather. aux fan switch, manual boost controller, 1988 ecu (which eliminates the boost cut at high psi), fuel cut mod High performance clutch and aluminum flywheel.New urethane suspension bushings. No cat, performance exhaust, dual HID's high/low beam, HID fog lamps AEM Uego. Full stereo system: Pioneer AVIC-d3 with bluetooth unit, and xm satellite radio. All interior speakers were recently changed to all pioneer 5 1/4's JBL mono amp and 10in sub in a shaved box (the trunk room is small) new CodeAlarm alarm. windows are tinted. Rims are unscratched and tires are new. Crossdrilled and slotted rotors and new ceramics all around car needs 2 things. The front airdam has cracks (but it's taped), and the previous owner mis-shifted and wound out 3rd gear. it shifts fine, but under high rps, you have to double clutch 3rd. couple of hundred to rebuild. Everything in this car works flawlessly. I drive this car every day. It runs perfect and handles like it's on rails. The a/c compressor was removed for weight, but I have it and all the lines should take someone about 30 minutes to put back in. I have receipts and a modification book that comes with the car. I hate to sell it, but have other things that need attention. $4,500. I'm negotiable, but only a little. There are thousands invested. Don't let the age and looks fool you. This car is a serious sleeper. SERIOUS INQUIRIES ONLY. NO BULL, CASH ONLY, NO TRADES 347-609-8670 ask for TOM

find tman on the forums. he is the man for all things Quest

So I purchased (through paypal) a set of switches for my Quest. It wasn't alot of money, but that's hardly the point. I've had numerous conversations with this person, and he assured me, that after 2 weeks of waiting, he would be sending them out. He didn't. It's now a month. So I warn anyone that wants parts from him, to beware. FEB 9, 2010: "Man i am so sorry,my old lady dont clean the house worth a s*** and i moved some clothes off a chair and there was your box 67 lenevar ave staten island,ny I owe you one for taking so long,i need to get a new girl but thats another story.I seen a post where you said you got screwed,ive had a brick and mortar business for over 10 years,its happened to me too many times for me to do it to anyone.I WILL GET A TRACKING NUMBER FOR YOU.It will be shipped tommorrow,thanks and sorry!" THIS GUY IS FULL OF IT!!! BUYER BEWARE

I am going to be doing a custom tailight mod, that I might consider offering to memebers. But I need a TEMPORARY set to use on my quest in the interim. Not concerned with spider cracks, or scratches, but need them to be complete. Please PM me if you have a set. thanks

ok, didnt know. now I do. so is 600 for them too much? lol

I apologize if I'm wrong about the wheels, but never the less they are in awesome condition.

I'm still learning, but I am under the assumption that they are SHP wheels. Rear is wider than the front

These wheels are currently on my car, but looking to upgrade to Konig runanways. They have NO DAMAGE, except one minor scrape on the lip that cannot be seen, and new tires. They are staggered (rear is wider). Just putting it out there to see if anyone is interested. I am in New York. Im looking to get 700. PM if interested

I did a remote start in mine. works awesome. unbolt the fuse block, twist it sideways, and pull it down. I believe the parking light wire is a black with a white stripe at the top right. just check it with a multimeter. one other issue!!!! it is almost IMPOSSIBLE to get a tach signal which is what the remote starter needs to stop cranking the engine. i would recommend using voltage check option and make sure the power source(that you connect the voltage check wire) is connected to the ignition harness. that will give the system a good read on whether it's running or not.

I need both sets of headlight switches, and hazrd switches. the assembly's on both sides. If u have them, i'll take em. how much? and how much to ship to 10309

hey Tman. due to someone else screwing me on the forums, I am looking for the headlight and fog switch assembly's. both sides. do you have them? shipping to 10309? please let me know asap. thanks

pm sent

i need the dash headlight switches. both assembly's that surround the gauges. need them asap. how much to ship to 10309? please email me instead of PM. pastduethomas@gmail.com ready to buy now!!! thanks

also need a factory wastegate if you have it!!!!!!!! tommy 347-609-8670