substock Posted March 4, 2009 Report Share Posted March 4, 2009 I have for sale one of Chads custom mpi intakes i purchased this last summer off of a friend with the hopes of using it, but unfortunatly right now a house calls so my magna will continue to suffice for me. the person i bought it from only mounted it never used it and since i purchased it it has not been installed. includes: intake fuel rail fuel fittings fuel line heater core hose T-stat housing ( modified to fit by chad ) intake sensor coolant sensor there might be more stuff that i am not able to think of right now. this intake is currently setup for a distributorless ignition setup, and will not work with a distributor. i am asking 715 shipped for everything., it is currently at chad's(as i was going to have it modified to fit the distributor, but this has not been done yet) if you would like to have this done it can be and you would need to pay the charge for the modifications. I was told this would be around 60-100 dollars. this is a really nice looking intake and the plenum is huge. if interested let me know, i would like to sell this ASAP pics taken when i purchased it, as stated the previous owner mounted it but never used it: http://i139.photobucket.com/albums/q299/I-W/M%20P%20I%20project/M-P-I-01-1.jpg http://i139.photobucket.com/albums/q299/I-W/M%20P%20I%20project/DCP_0330.jpg http://i97.photobucket.com/albums/l225/substock/Misc/DSC00033.jpg Quote Link to comment Share on other sites More sharing options...
BMWTech Posted March 4, 2009 Report Share Posted March 4, 2009 PM sent Quote Link to comment Share on other sites More sharing options...
mstieg Posted March 5, 2009 Report Share Posted March 5, 2009 Chad makes a great intake (and equal length exhaust manifold too). Helped get me over 350 despite WG probs. Quote Link to comment Share on other sites More sharing options...
substock Posted March 5, 2009 Author Report Share Posted March 5, 2009 pending Quote Link to comment Share on other sites More sharing options...
VICE Posted March 15, 2009 Report Share Posted March 15, 2009 So whats the comparison of this intake vs the magna? Quote Link to comment Share on other sites More sharing options...
jwbrocloud Posted March 16, 2009 Report Share Posted March 16, 2009 Magna = long runners and smaller plenum. Chad's= shorter runners and large plenum. Quote Link to comment Share on other sites More sharing options...
substock Posted March 16, 2009 Author Report Share Posted March 16, 2009 bump, i have a spare throttle body to go with this. i do not have a spare tps though Quote Link to comment Share on other sites More sharing options...
spoolinturbo Posted March 16, 2009 Report Share Posted March 16, 2009 so ur keeping the injectors? distributeless is nice...i have the components for that. were u planning on running with MS? does it use stock gasket? Quote Link to comment Share on other sites More sharing options...
substock Posted March 16, 2009 Author Report Share Posted March 16, 2009 so ur keeping the injectors? distributeless is nice...i have the components for that. were u planning on running with MS? does it use stock gasket? i do not have any injectors with the intake, so that is why there are none for sale. I was planning on using ms2 edis, wasted spark, or a COP system. it does use the stock intake gasket, you will need to make a small gasket to cover the hole that the metal plat covers(i may have some spare cork gasket laying around from when i made one for my magna intake) Quote Link to comment Share on other sites More sharing options...
substock Posted March 20, 2009 Author Report Share Posted March 20, 2009 last bump before it goes on ebay. Quote Link to comment Share on other sites More sharing options...
Chad Posted April 7, 2009 Report Share Posted April 7, 2009 Bump for somone looking for an MPI that emailed me... Quote Link to comment Share on other sites More sharing options...
substock Posted May 3, 2009 Author Report Share Posted May 3, 2009 (edited) bump still have it. 650 + 20 for shipping(this is much less then i bought it for, plus i believe chad sell the intake alone for 750) this is the last bump, if it doesn't sell i'll be keeping it. Edited May 6, 2009 by substock Quote Link to comment Share on other sites More sharing options...
D3F0 Posted April 10, 2015 Report Share Posted April 10, 2015 Hey question how long are the runners for this intake if you still have it? I am trying to build these from scratch. Quote Link to comment Share on other sites More sharing options...
Tman Posted April 10, 2015 Report Share Posted April 10, 2015 6 year old thread Quote Link to comment Share on other sites More sharing options...
IntercooledFlatty Posted April 10, 2015 Report Share Posted April 10, 2015 meow Quote Link to comment Share on other sites More sharing options...
Edde Posted April 11, 2015 Report Share Posted April 11, 2015 Gotta luv the SQC Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted April 11, 2015 Report Share Posted April 11, 2015 6 year old thread Well, A+ for using the search though. Hey DF30 PM me for measurements Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.