Turbo Cary Posted February 22, 2015 Report Share Posted February 22, 2015 (edited) I just got a Megasquirt system but im not quite sure which one it is or if I can run it on my TBI system before I go MPI. Heres some pics. The guy said he was going to use it for his MPI quest. I have a mighty max distributor I need to make a plate/spacer for, and a 24 tooth trigger wheel to go in it. I have extra ford and chrysler coils to use as well if it has to be distributorless. Also if anyone knows how to wire it up or what options I might have for it. Any help is appreciated! Edited February 22, 2015 by Turbo Cary Link to comment Share on other sites More sharing options...
scott87star Posted February 22, 2015 Report Share Posted February 22, 2015 unscrew the top lid and take some pictures of the interior board, that will tell me what it is. It will run TBI or MPI and it will run the distributor or you can go distributorless. Link to comment Share on other sites More sharing options...
psu_Crash Posted February 22, 2015 Report Share Posted February 22, 2015 Scott beat me to it No way to tell unless you connect to it or open it up. With a large case like that it's sure to have some extra hardware in there. Curious to see what you find Link to comment Share on other sites More sharing options...
Turbo Cary Posted February 22, 2015 Author Report Share Posted February 22, 2015 Link to comment Share on other sites More sharing options...
Turbo Cary Posted February 22, 2015 Author Report Share Posted February 22, 2015 If you need better pics let me know. The wires were so tight and bundled in the case i didnt want to break anything when I opened it up. Link to comment Share on other sites More sharing options...
psu_Crash Posted February 22, 2015 Report Share Posted February 22, 2015 Looks like an MS1 v3.0 with additional I/O board Link to comment Share on other sites More sharing options...
Turbo Cary Posted February 22, 2015 Author Report Share Posted February 22, 2015 What should I do with it? Does it need to be torn down a reconfigured for tbi? Id like to be able to hook it up and get rid of my crappy stock ecu and have some tunability. well better than using my maf t and safc. Link to comment Share on other sites More sharing options...
scott87star Posted February 22, 2015 Report Share Posted February 22, 2015 OMG, it's a V2.2 MS1 with a built in I/O extender board. Wow, old school by today's standards. I can be reconfigured for tbi for sure, I just wouldn't be able to tell you how to do it, I would have to do it myself. Mostly because I'd need to test things as modifications were made, you have to have a scope to test. Link to comment Share on other sites More sharing options...
Turbo Cary Posted February 22, 2015 Author Report Share Posted February 22, 2015 whats the cost for something like that run? Id like to do it soon if possible Link to comment Share on other sites More sharing options...
scott87star Posted February 23, 2015 Report Share Posted February 23, 2015 PM'ed Link to comment Share on other sites More sharing options...
psu_Crash Posted February 23, 2015 Report Share Posted February 23, 2015 A 2.2 board. Never seen one before so I just assumed v3 Link to comment Share on other sites More sharing options...
Recommended Posts