spoon32 Posted January 20, 2013 Report Share Posted January 20, 2013 (edited) Over the past few years I've reconfigured quite a few items on my car and now have some extra items I no longer need........ Intake manifold was run on the car for 2 years with me in addition to the 2 prior owners of the car. The manifold was originally built by quest925 ( http://www.starquest...topic=58298&hl= ). It has had some modifications along the way.Firstly at some point the throttle body was welded to the manifold. Secondly a the rear coolant port was opened up in order to flow to the heater core. The original paint had gotten pretty bad from heat/chemicals so I cleaned the majority of it off.Other bits: throttle body is a 65mm BBK for a 86-93 5.0L mustang, works with stock throttle cable, uses an inline thermostat housing (not in photos but will supply with intake). Manifold made good power and was very streetable. I would recommend the throttle body be cut off and a different TB put on. Like ALL BBK throttle bodies it suffers from vacuum lock at small throttle openings.http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010049_zps90955cd3.jpghttp://i1101.photobucket.com/albums/g428/sq_spoon32/P1010050_zps42efa360.jpghttp://i1101.photobucket.com/albums/g428/sq_spoon32/P1010051_zps550f42fc.jpghttp://i1101.photobucket.com/albums/g428/sq_spoon32/P1010052_zpsaf8afa3b.jpg Also for sale is an EDIS setup excluding the VR sensor and trigger wheel. EDIS module was purchased new and has less than 1000mi on it. Coil pack is a high discharge unit from ACCEL.http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010053_zps1e1fee9c.jpghttp://i1101.photobucket.com/albums/g428/sq_spoon32/P1010054_zps16b9ba37.jpg Asking 350$ for the manifold and 70$ for the EDIS components. Will consider offers.Thanks,--Eric Edited January 24, 2013 by spoon32 Quote Link to comment Share on other sites More sharing options...
spoon32 Posted January 20, 2013 Author Report Share Posted January 20, 2013 I also have 2 turbos for sale.......... 18G with a polished cover and a 17c typhoon/cyclone turbo. The 18G needs rebuilt and a new compressor wheel. The 17c is of unknown condition. I can sell them as is or I can PERSONALLY rebuild them for the buyer. Price is negotiable on both depending on the condition the buyer chooses. Photos available upon request. --Eric Quote Link to comment Share on other sites More sharing options...
spoon32 Posted January 24, 2013 Author Report Share Posted January 24, 2013 Below is a photo with everything installed in the car. http://i1101.photobucket.com/albums/g428/sq_spoon32/100_1138_zps9744b1f5.jpg Quote Link to comment Share on other sites More sharing options...
spoon32 Posted January 24, 2013 Author Report Share Posted January 24, 2013 More items found around the house for sale or trade........... Make offers on any items. (1) 240mm stock flywheel in good condition(1) OEM radiator with no leaks...... has never been cleaned but car did never overheated even in traffic. Primary and secondary fans are still attached and both work.(1) Torque tube drive shaft. spline teeth are clean and in good condition(1) Spline hub for differential input. Was used with the torque tube above and also cleaned with spline teeth in excellent shape. Can get photos of any of the above upon request. Quote Link to comment Share on other sites More sharing options...
89BananaQuest Posted January 24, 2013 Report Share Posted January 24, 2013 What all is included with the edis stuff? Any of the dizzy block off parts? How was it wired up? Quote Link to comment Share on other sites More sharing options...
spoon32 Posted January 24, 2013 Author Report Share Posted January 24, 2013 The EDIS package includes everything needed except the VR sensor (5-10$ of ebay new) and the crank trigger wheel. I used the Mookeh crank trigger wheel. No need for a dizzy block off plate....... knocking a brass freeze plug in the head seals the dizzy hole and looks good. I was running the whole MPI setup with megasquirt 3. I can help with wiring and diagrams if needed. Thanks for the questions, --Eric Quote Link to comment Share on other sites More sharing options...
spoon32 Posted February 10, 2013 Author Report Share Posted February 10, 2013 Bump....... Send offers on any of the above parts. Haven't even received a single offer on anything! Quote Link to comment Share on other sites More sharing options...
Ironside Posted February 10, 2013 Report Share Posted February 10, 2013 PM'd ya bro. Quote Link to comment Share on other sites More sharing options...
8starion7 Posted February 11, 2013 Report Share Posted February 11, 2013 Pm'd Quote Link to comment Share on other sites More sharing options...
mrvwbug Posted March 19, 2014 Report Share Posted March 19, 2014 Is the 18g a bolt on? And what will in needed in order to rebuild it? In plain terms it needs everything? Send me pics please! Quote Link to comment Share on other sites More sharing options...
87B71Brad Posted March 19, 2014 Report Share Posted March 19, 2014 (edited) Info and/or pics on 18g and 17c. I assume the 17c is not gonna fit into a td05(h) hotside? Thanks! Edited March 19, 2014 by 87B71Brad Quote Link to comment Share on other sites More sharing options...
87redcat Posted March 19, 2014 Report Share Posted March 19, 2014 Can you send me some pics of the flywheel please.Thanks Quote Link to comment Share on other sites More sharing options...
freebird Posted March 19, 2014 Report Share Posted March 19, 2014 wow 18g and a 17c.... some of my favorites....how much just as they are?I could drive there and pick them up even. Quote Link to comment Share on other sites More sharing options...
Tman Posted March 20, 2014 Report Share Posted March 20, 2014 this post is like a year old Quote Link to comment Share on other sites More sharing options...
namelessdriver Posted March 24, 2014 Report Share Posted March 24, 2014 Manifold still available? Quote Link to comment Share on other sites More sharing options...
87redcat Posted March 24, 2014 Report Share Posted March 24, 2014 this post is like a year oldIt was worth a shot.lol Quote Link to comment Share on other sites More sharing options...
keith jennings Posted April 13, 2014 Report Share Posted April 13, 2014 do u still have any parts for sale? Quote Link to comment Share on other sites More sharing options...
spoon32 Posted April 22, 2014 Author Report Share Posted April 22, 2014 Still available......... Quote Link to comment Share on other sites More sharing options...
hopefull noob Posted April 22, 2014 Report Share Posted April 22, 2014 Pm Quote Link to comment Share on other sites More sharing options...
questsale Posted April 22, 2014 Report Share Posted April 22, 2014 do you have a crank wheel? Quote Link to comment Share on other sites More sharing options...
spoon32 Posted April 22, 2014 Author Report Share Posted April 22, 2014 (edited) do you have a crank wheel? Don't have that. Sorry. Edited April 22, 2014 by spoon32 Quote Link to comment Share on other sites More sharing options...
questsale Posted April 23, 2014 Report Share Posted April 23, 2014 how about pickup sensor mount, or dizzy block off plate? Quote Link to comment Share on other sites More sharing options...
spoon32 Posted April 23, 2014 Author Report Share Posted April 23, 2014 I do have a sensor mount. No need for a block off plate..... a freeze plug or expanding rubber plug work great. Quote Link to comment Share on other sites More sharing options...
questsale Posted April 23, 2014 Report Share Posted April 23, 2014 Who made the mount? Got pics? Quote Link to comment Share on other sites More sharing options...
spoon32 Posted April 23, 2014 Author Report Share Posted April 23, 2014 Who made the mount? Got pics? Photo Here... http://i1101.photobucket.com/albums/g428/sq_spoon32/VR%20Sensor%20Bracket/NCM_0089_zps48d21ca6.jpg It is a mookeh mount and can be seen on his page also.... http://www.starionpartsfactory.com/engine.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.