shawn36s

I'm also interested in that cylinder head if adavis1011 doesn't grab it.

PM sent, thank you.

Still looking for thishttp://i1087.photobucket.com/albums/j472/shawn36s/OilJoint2.jpg

Do you have the fitting for the oil feed line for the turbo? The one right next to the oil filter. I'll also buy the oil filter bracket if you want to take it off.

Found out the part is discontinued.

That was the first place I tried ordering from. They had them listed on the website, but they didn't have any to send. Called a few dealers that had them listed online and they didn't have them either.

Will you sell the oil filter bracket and fitting for the turbo feed line seperately from the block?

I’m still looking for this part. I haven't been able to find it new, so just looking for used. I might also need the oil filter bracket since it looks like some of the threads are cross-threaded. The previous owners really did a number on this Starion, but after a year of replacing parts I just need these to get it running.

Thanks for the quick reply!

Could someone sell me the oil feed line joint for the turbo? It is the connection right next to the oil filter. The previous owner had it blocked off. Part number MD050533. My zip code is 79416. Thanks

Does it include the connectors for the radio and HVAC controller?

I'd be interested in this for a 1987 Starion. Do you still have it?

I'm missing the solenoid and pressure sensor on my 87 Starion. Let me know how much it is for the combo shipped to 79416. Thanks

I'm looking at buying a stock turbo without a hotside. Is my hotside still up to par or should I look at replacing it too? Thanks. http://i1087.photobucket.com/albums/j472/shawn36s/Turbo-1.jpg

The ECU is still there but I'm probably just going to replace the wire harness. It is the Starion in this post: http://www.starquestclub.com/forum/index.php?showtopic=125275