Jump to content

88/89 KM132 Transmission Bearing P/N's and Info


Recommended Posts

This is in conjunction to a rebuild thread that I'm in the process of creating for an 88/89 KM132 manual transmission.

 

Below are part numbers, actual dimensions, and some other info for the internal transmission bearings.

 

Note: Inch measurements were taken using calipers. mm was converted from the actual inch measurements.

 

THIS INFORMATION WAS COLLABORATED FOR AN 88/89 CONQUEST/STARION KM132 MANUAL TRANSMISSION. EARLIER MODELS MAY DIFFER.

 

Needle Roller Bearings; Reference PG 21M-800 of the parts manual along with illustration 21M-14

 

Item 22; 4th gear (connection between input and main shafts):

  • Qty Needed: 1
  • Part Number: MD731433
  • ID (shaft): .787" (20mm)
  • OD (socket): 1.101" (28mm)
  • t: .768" (19.5mm)
  • Roller dia: .155" (3.9mm)
  • # Rollers: 12

full

 

Item 28; 1st and 2nd gear:

  • Qty Needed: 2
  • Part Number: MD703760
  • ID (shaft): 1.692" (43mm)
  • OD (socket): 1.890" (48mm)
  • t: 1.166" (29.6mm)
  • Roller dia: .096" (2.4mm)
  • # Rollers: 30

full

 

Item 24; 3rd gear ONLY:

  • Qty Needed: 1
  • Part Number: MD701760
  • ID (shaft): 1.376" (35mm)
  • OD (socket): 1.575" (40mm)
  • t: 1.122" (28.5mm)
  • Roller dia: ..096" (2.4mm)
  • # Rollers: 25

full

 

Item 54; Reverse gear:

  • Qty Needed: 1
  • Part Number: MD713674
  • ID (shaft): 1.692" (43mm)
  • OD (socket): 1.890" (48mm)
  • t: .896" (22.75mm)
  • Roller dia: .096" (2.4mm)
  • # Rollers: 30

full

 

Item 24; 5th gear only (split bearing) (88/89 specific):

  • Qty Needed: 1 set
  • Part Number: MD729188
  • ID (shaft): 1.376" (35mm)
  • OD (socket): 1.575" (40mm)
  • t: 1.122" (28.5mm)
  • Roller dia: .096" (2.4mm)
  • # Rollers: 12 per half

full

 

Item 18; reverse/idler shaft:

  • Qty Needed: 2
  • Part Number: MD712965
  • ID (shaft): .863" (22mm)
  • OD (socket): 1.023" (26mm)
  • t: .650" (16.5mm)
  • Roller dia: .075" (1.9mm)
  • # Rollers: 20

full

 

 

 

 

Other Bearings:

 

 

Output Shaft Rear Ball Bearing:

 

  • Qty Needed: 1
  • Part Number: MD703754
  • ID: 1.102" (28mm)
  • OD: 2.282" (58mm)
  • t: .629" (16mm)
  • Manufacturer: NSK
  • Manuf. P/N: TM2/28
  • Motion Industries P/N: 00040278

full

 

full

 

Counter Shaft Rear Ball Bearing:

 

  • Qty Needed: 1
  • Part Number: MD727302
  • ID: .864" (22mm)
  • OD: 2.204" (56mm)
  • t: .628" (16mm)
  • Manufacturer: KOYO
  • Manuf. P/N: DG2256RKD
  • Motion Industries P/N: 01447850

full

 

full

 

Input Shaft Bearing (88/89 specific):

 

  • Qty Needed: 1
  • Part Number: MD728055
  • ID: 1.376" (35mm)
  • OD: 3.148" (80mm)
  • t: .942 (24mm)
  • Flange OD: 3.347" (85mm)
  • Flange t: .168 (4.27mm)
  • Manufacturer: NTN
  • Manuf. P/N: TM-SX07840UC540PXI

full

 

full

 

full

 

Countershaft Bearing:

 

  • Qty Needed: 2
  • Part Number: MD727458
  • ID: 0.983" (25mm)
  • OD: 2.046" (52mm)
  • t: .625 (15mm)
  • Manufacturer: NSK
  • Manuf. P/N: HR 30205J
  • Motion Industries P/N: 00131493

full

 

Center Bearing (88/89 specific):

 

  • Qty Needed: 1
  • Part Number: MD727572
  • ID: 1.377" (35mm)
  • OD: 2.832" (72mm)
  • t: 1.375" (35mm)
  • Flange OD: 3.090" (78.5mm)
  • Flange t: .198 (5mm)
  • Manufacturer: NACHI
  • Manuf. P/N: 35BVV07X-7

 

full

 

kev

Link to comment
Share on other sites

 Share

×
×
  • Create New...