Jump to content



GNT Short throw shifter


  • Please log in to reply
72 replies to this topic

#1 wrngwae

wrngwae

    Always Smooth like Keith Stone

  • Vendors
  • PipPipPip
  • 3,450 posts
  • Gender:Male
  • Location:LaPorte, IN
  • Interests:trying to keep this motor under the hood, and off the engine stand
  • Model:Conquest

Posted 29 July 2014 - 07:08 PM

GNT Performance short throw shifters available NOW!  They will be available in a limited number of 10 right now. Unfortunately due to added machining costs the price will have to take a minor increase. They will be available in bent and straight shaft. 3 straight shaft and 7 bent shaft shifters. Unfortunately we cannot offer the base gaskets due to the unavailability of them but silicone will work. If there is a lot of interest in these we can have a gasket punch made and produce them ourselfs. These kits do require some of your factory shifter parts. We will offer an assembly service for those wanting it. You will have to ship us your shifter for a core. Or pay a 40$ core fee on it upfront Until it arrives for disassembly.  

PM for any questions or concerns


Prices will be.

175+12 shipping + 3% paypal fees.

Posted Image


And for the assembly ready to bolt and go.

210+12 shipping +3% paypal fees + 40$core fee upfront! we have had returning core issues.


Posted Image

Posted Image


Paypal address is cambe@csinet.net.

If these sell expect another price adjustment. For the next run sorry. Wish we could sell them cheaper but unfortunately we cannot.

Edited by wrngwae, 24 March 2015 - 06:22 PM.

1989 Conquest  MOTOR BUILT BY DAD!!!!!!!!!.20 over block. Wiseco pistons.new M28 head w/ ss valves. Holeset Hx35 at 25psi.Snow Performance Meth injection, hurricane MPI intake manifold. 750 injectors. 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star to control spark, and boost. running MS2.0.6. XTD stage 3 clutch.  I'm likely forgetting something. http://www.enginemachineservice.com http://www.starquestgarage.com
Scotts the man! check out his store.  http://www.starquest...             My site provided by Natallica the sticker Guru http://nbingaman.wix.../gntperformance Posted Image





#2 importwarrior

importwarrior

    6 Quests and Counting......

  • Moderators
  • PipPipPipPipPip
  • 17,663 posts
  • Gender:Male
  • Location:Manassas VA
  • Interests:Boost = 2KWIK4U
    Starquests
  • Model:Conquest

Posted 29 July 2014 - 07:19 PM

pm'd

Edited by importwarrior, 29 July 2014 - 07:20 PM.

B-71 87 TSI ~ RIP
Black 87 Starion ~ Mess SOLD!!!
Proud New 89 slightly Rusted Fiji Owner !!!

The Ark was built by amateurs , the Titanic was built by Professionals.


#3 SOTTY

SOTTY

    Advanced Member

  • Members
  • PipPipPipPip
  • 6,466 posts
  • Gender:Male
  • Location:Lost Wages , Nevada
  • Interests:Az gotz da cotton mouff
  • Model:Conquest

Posted 29 July 2014 - 07:31 PM

The short shitter iz BACK , gotto love em .
Winning at U.S hot rod and classic car shows with a Mitsubishi since 2009

#4 19cturbo

19cturbo

    BREAKFAST OF CHAMPIONS! BOOST!

  • Members
  • PipPipPipPip
  • 6,623 posts
  • Gender:Male
  • Location:KINGSPORT TN.
  • Interests:cars
  • Model:Starion

Posted 29 July 2014 - 09:27 PM

good price.. just to give you some perspective, i paid 280 for the short throw for my R154
Being not real since I learned what was good for me

View PostConvette, on 21 February 2016 - 11:51 AM, said:

The only reason I'm doing it is basically... cause I can.

Posted Image

#5 natallica

natallica

    Resident Graphics Guru

  • Vendors
  • PipPipPip
  • 3,007 posts
  • Gender:Male
  • Location:Mont Alto, PA
  • Interests:Music, Movies, Guitars, Family, Computers and Starquests!!!
  • Model:Conquest

Posted 29 July 2014 - 10:24 PM

I'll add to your site tomorrow, Sirs

BTW, I need 3 for all my "auto" cars... Tee hee

-N8

Posted Image


#6 duckheads

duckheads

    Established Member

  • Vendors
  • PipPipPip
  • 642 posts
  • Gender:Male
  • Location:LaPorte, IN
  • Model:Starion

Posted 29 July 2014 - 10:34 PM

View Postnatallica, on 29 July 2014 - 10:24 PM, said:

I'll add to your site tomorrow, Sirs

BTW, I need 3 for all my "auto" cars... Tee hee

-N8

Thank you!  You are a gentleman and a scholar!  Haha!

And you let us know when you swap those autos! Lolz!
Visit my site for your performance needs http://nbingaman.wix.../gntperformance
1988 White Starion Bone Stock and staying that way
1987 Red Conquest fresh motor, big 16g and MAFT

#7 JohnnyWadd

JohnnyWadd

    Advanced Member

  • Banned
  • PipPipPipPip
  • 8,936 posts
  • Gender:Male
  • Location:Oregon
  • Model:Conquest

Posted 29 July 2014 - 10:36 PM

no need for gasket just make the spacer block from your red urethane!

#8 idfaskpure

idfaskpure

    Member

  • Members
  • PipPip
  • 34 posts
  • Gender:Male
  • Location:Elk River, MN
  • Model:Conquest

Posted 30 July 2014 - 03:53 AM

I sent PayPal for straight short throw full assembly

#9 importwarrior

importwarrior

    6 Quests and Counting......

  • Moderators
  • PipPipPipPipPip
  • 17,663 posts
  • Gender:Male
  • Location:Manassas VA
  • Interests:Boost = 2KWIK4U
    Starquests
  • Model:Conquest

Posted 30 July 2014 - 06:09 AM

View PostJohnnyWadd, on 29 July 2014 - 10:36 PM, said:

no need for gasket just make the spacer block from your red urethane!

good idea!

B-71 87 TSI ~ RIP
Black 87 Starion ~ Mess SOLD!!!
Proud New 89 slightly Rusted Fiji Owner !!!

The Ark was built by amateurs , the Titanic was built by Professionals.


#10 wrngwae

wrngwae

    Always Smooth like Keith Stone

  • Vendors
  • PipPipPip
  • 3,450 posts
  • Gender:Male
  • Location:LaPorte, IN
  • Interests:trying to keep this motor under the hood, and off the engine stand
  • Model:Conquest

Posted 30 July 2014 - 06:31 AM

HAHAHA,,, you guys are crazy.... but not real crazy... let me think on that one...



idfaskpure  got your payment...... building it tonight. and ship tomorrow. but i need your core. that is the last one i have so please dont keep it.
1989 Conquest  MOTOR BUILT BY DAD!!!!!!!!!.20 over block. Wiseco pistons.new M28 head w/ ss valves. Holeset Hx35 at 25psi.Snow Performance Meth injection, hurricane MPI intake manifold. 750 injectors. 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star to control spark, and boost. running MS2.0.6. XTD stage 3 clutch.  I'm likely forgetting something. http://www.enginemachineservice.com http://www.starquestgarage.com
Scotts the man! check out his store.  http://www.starquest...             My site provided by Natallica the sticker Guru http://nbingaman.wix.../gntperformance Posted Image

#11 randy

randy

    Established Member

  • Members
  • PipPipPip
  • 4,083 posts
  • Interests:Starquests forever!
  • Model:Other

Posted 30 July 2014 - 06:59 AM

Man ya doing some great things there.

#12 Potamus

Potamus

    Infidel

  • Members
  • PipPipPip
  • 1,389 posts
  • Gender:Male
  • Location:Camden Mi
  • Model:Starion

Posted 30 July 2014 - 07:32 AM

Awesome theses shifters are great.
MY Build Thread http://www.sqperform...php?topic=222.0
Posted Image
GNT Performance, Awesome High Quality Parts http://nbingaman.wix.../gntperformance

#13 IntercooledFlatty

IntercooledFlatty

    Get Sum

  • Members
  • PipPipPipPipPip
  • 14,246 posts
  • Gender:Male
  • Location:Schwetty BallZ Louisiana
  • Model:Conquest

Posted 30 July 2014 - 11:03 AM

these guys keep rollin out the good stuff :D
Posted Image
          MOPAR POWERED

#14 natallica

natallica

    Resident Graphics Guru

  • Vendors
  • PipPipPip
  • 3,007 posts
  • Gender:Male
  • Location:Mont Alto, PA
  • Interests:Music, Movies, Guitars, Family, Computers and Starquests!!!
  • Model:Conquest

Posted 30 July 2014 - 11:36 AM

View Postduckheads, on 29 July 2014 - 10:34 PM, said:

Thank you!  You are a gentleman and a scholar!  Haha!
Here ya go Dude! Updated!

Short Throw Shifter Kit

-N8

Posted Image


#15 JohnnyWadd

JohnnyWadd

    Advanced Member

  • Banned
  • PipPipPipPip
  • 8,936 posts
  • Gender:Male
  • Location:Oregon
  • Model:Conquest

Posted 30 July 2014 - 11:41 AM

How do these compare to the Stedabani ones though?

Edited by JohnnyWadd, 30 July 2014 - 11:41 AM.


#16 wrngwae

wrngwae

    Always Smooth like Keith Stone

  • Vendors
  • PipPipPip
  • 3,450 posts
  • Gender:Male
  • Location:LaPorte, IN
  • Interests:trying to keep this motor under the hood, and off the engine stand
  • Model:Conquest

Posted 30 July 2014 - 11:47 AM

Jeff. They are the same. We just can't use there name. That's all
1989 Conquest  MOTOR BUILT BY DAD!!!!!!!!!.20 over block. Wiseco pistons.new M28 head w/ ss valves. Holeset Hx35 at 25psi.Snow Performance Meth injection, hurricane MPI intake manifold. 750 injectors. 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star to control spark, and boost. running MS2.0.6. XTD stage 3 clutch.  I'm likely forgetting something. http://www.enginemachineservice.com http://www.starquestgarage.com
Scotts the man! check out his store.  http://www.starquest...             My site provided by Natallica the sticker Guru http://nbingaman.wix.../gntperformance Posted Image

#17 JohnnyWadd

JohnnyWadd

    Advanced Member

  • Banned
  • PipPipPipPip
  • 8,936 posts
  • Gender:Male
  • Location:Oregon
  • Model:Conquest

Posted 30 July 2014 - 12:54 PM

View Postwrngwae, on 30 July 2014 - 11:47 AM, said:

Jeff. They are the same. We just can't use there name. That's all

I know.  I was playing around.

#18 averse

averse

    Established Member

  • Members
  • PipPipPip
  • 1,971 posts
  • Gender:Male
  • Location:Tucson, AZ
  • Model:Conquest

Posted 31 July 2014 - 12:57 AM

Of what material is the bushing made?  The MK1 bushings wear out so fast and I think they are nylon instead of delrin or something more durable.

Posted Image


#19 wrngwae

wrngwae

    Always Smooth like Keith Stone

  • Vendors
  • PipPipPip
  • 3,450 posts
  • Gender:Male
  • Location:LaPorte, IN
  • Interests:trying to keep this motor under the hood, and off the engine stand
  • Model:Conquest

Posted 31 July 2014 - 08:27 AM

They are delrin pivot balls

Edited by wrngwae, 31 July 2014 - 08:28 AM.

1989 Conquest  MOTOR BUILT BY DAD!!!!!!!!!.20 over block. Wiseco pistons.new M28 head w/ ss valves. Holeset Hx35 at 25psi.Snow Performance Meth injection, hurricane MPI intake manifold. 750 injectors. 3" exhaust. 3bar map sensor. Ajusta Head gasket. ARP head studs. FIP updated by Scott87star to control spark, and boost. running MS2.0.6. XTD stage 3 clutch.  I'm likely forgetting something. http://www.enginemachineservice.com http://www.starquestgarage.com
Scotts the man! check out his store.  http://www.starquest...             My site provided by Natallica the sticker Guru http://nbingaman.wix.../gntperformance Posted Image

#20 IntercooledFlatty

IntercooledFlatty

    Get Sum

  • Members
  • PipPipPipPipPip
  • 14,246 posts
  • Gender:Male
  • Location:Schwetty BallZ Louisiana
  • Model:Conquest

Posted 31 July 2014 - 11:19 AM

straight or bent...that is the question :unsure:  i had the straight one in a Fiji car, is the bent one A LOT different feeling ?
Posted Image
          MOPAR POWERED




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users