Jump to content

Mighty Max FSM


Recommended Posts

I have the 1988 Dodge Ram 50 manuals. I can take pictures of some of the pages if that would help you out at all. Are you looking for info on the manual or auto trans?

Rob, Thanks for the help offer. What I am looking for is the 2.6 wide block factory engine blueprint dimensions-specifically the rear engine/bellhousing area. I need these dimensions to make an adapter plate to adapt a 89 2.6 turbo trans to a Mazda 2.3 MZR engine. Please refer to my original May 28 6:08 PM post as well as button response May 28 9:28 Post#3. This is the info I need but for a wide block that was found in the D50 and Mighty Max. I you can help it will be greatly appreciated. You can only guess as to how much effort I have put in this project only to stall out at the finish line. Thanks very much Danny

Link to comment
Share on other sites

That blueprint/bolt pattern info isn't available in any of the FSM's that I have seen. Button got that image from this topic on another Starquest forum.

 

You may have to register at this website before you can see this post.

 

Professor Quest took a picture of the cover of the book he got the info out of, so maybe you can track that book down.

 

The other guy that might be able to help you is Bill Hincher. He can be found here: http://www.Projectzerog.com/forums/. He has been building custom bellhousings to adapt different trans. to the 4g63. I have been to his shop and he definitely has the know-how and the tools to make the adapter plate you need. Run it by him and see if he is interested in helping you out. His website is http://www.billsautofab.com/ to see some of his work.

 

Good luck.

Link to comment
Share on other sites

 Share

×
×
  • Create New...