Rear calipers for the Mitsubishi Starion.
New bearings!
New belleview washers!
I completely disassembled the calipers, cleaned them with a dremel, cleaned the moving parts with a wire brush, had the calipers bead blasted, then I painted and reassembled them with all the parts that they came with (the rubber parts and pistons were in ok nick and the calipers were working so I reused the parts).
All operational and functional, but no brake fluid added so you can disassemble them and fit a new seal, dust boot and piston kit easily if you want to. The only part that is missing (apart from the brackets and pad hardware) is the handbrake cable guide/bracket on one of the calipers.
Instructions for reassembly are in the forums here:
Instructions work a treat!
Rear calipers only, no brackets.
Good for an economy restoration!
Pricing is in New Zealand dollars (I accept paypal) and can easily calculate freight costs when I have your address (approx $60 to $80 NZD). Calipers are, obviously, located in New Zealand. International shipping is not a problem if you're happy to pay for it.
$350nzd ono