tjs91tsi

Hey guys, I have a set of wheels i just don't need anymore. I have a Pair of SHP rear 9" wheels. One SHP front 8" and one regular 7" front wheel. Very minimal rash on the lips, some clear coat peeling, no obvious hard dents, flat spots or gouges. Previous Owner claims they were powdercoated. The center portion, (except for the lip) is all a dull black. I cant verify if it is powdercoating or just good paint but it feels tough. They were all on one car, he didnt know one of them wasn't an shp front wheel. All wheels are in boxes and ready to ship. Asking $250 for the rear 9s, $75 for the front 8" and $50 for the front 7". Shipping will be 25-30$ per wheel depending on your zip code. Im sorry, cannot upload pictures until later tonight, but i can email or text them anytime. Call or Text me at 520-235-5254 Tyler

Thanks for the advice guys. I really thought they were just drop ins. That's pretty aggravating as this was supposed to be the stock daily and not the tuner car. If i had a maf-t or safc, I would've probably just got slightly larger injectors to begin with. I doubt it's a voltage or clip issue since it runs great consistently with the stock primary and new trilogy secondary injector on it, only crappy with the new trilogy primary. I did a voltage drop test and found some resistance on the ground side of my maf and tps and repaired it. I was the main ground under the battery. I will double check the voltage supply though. I replaced the injector clips when I first got the car 5 years ago, but I am planning on changing them again as these seem a little cheesy and flimsy... Tyler

I also have a pretty damn straight mezzon gold 84 starion for sale. Located in Tucson Az. Interior is trash, no engine, was auto. good glass. pm me. Tyler

I have an 88 Starion with Wiseco 8.5:1 pistons, non jet head with 1mm os valves, 1gen maf, stock turbo and stock boost levels. Car has always idled really well and run nicely. A few months ago my car started stumbling on high boost, I checked fuel pressure and it was perfectly within spec. I assumed secondary injector on its way out. A few weeks ago, she started dying on me, running rough. I hooked up a labscope and my primary and secondary injectors were clearly almost dead. I swapped in a spare 88 primary injector and it started idling perfectly again, running great except for the stumble up top. So I ordered some 650/950 trilogy injectors, installed them and now it idles like complete garbage, misses under part throttle, but runs decent at wot. I swapped the injector clips around and it seemed to idle a little better being richer but hardly acceptable. I looked at the spray pattern, noticed they are very narrow, almost like squirt guns. Did some research on them and turns out that's a problem with aftermarket injectors. Some people have good results, others don't. With some ingenuity, I remounted the stock primary and new trilogy secondary and she runs great again and now nicely up top. wt....? Is there any way to get these aftermarket trilogy injectors (delphi?) working properly? WIll resetting the tps/isc help at all? Do they normally need to tune it with a maft or afc? Any help or suggestions? Thank you, Tyler.

Hey guys. I have this gold starion i couldnt get to in time before it was ruined. Automatic trans. I do NOT have a Title for it. It no longer has an engine, cat, cowl and a bunch of other misc pieces. Will probably also be missing the fog lights and maby headlights. The interior is in really rough shape from sitting in the hot desert sun for ages. The body is actually very clean, has all good glass. Id love this to go to someone who can resurrect it (bonded or abandoned titles are much easier than people think) or part it out properly and get the parts to someone who needs em. I simply so not have the time or energy for another project like this. $100 Call or text 520-235-5254 or email me at tylerjandran@yahoo.com

Mods, I appoligize this is pouring over from the feedback forum but this is not behavior that should be tolerated by anyone on this fine forum period. People need to be aware. Its not fun being taken advantage of. Tyler

Ups has been known to toss them over the wall. USPS does NOT. They have a shared lock box/mail box for packages which is what mine came in like I already told you. <p class="author_info"> Newbie http://www.starquestclub.com/forum/public/style_images/master/profile/default_large.png Members http://www.starquestclub.com/forum/public/style_images/master/bullet_black.png 30 posts Gender:Male Location:Tuson Az. Model:Starion Sent 04 June 2012 - 05:55 PM Hey Brian. The console arrived today. I'm sorry but it was packaged beyond Un-satisfactorily and now Its in about 8 pieces. It's in worse shape than the one I have. They didn't put it in my back yard, It was put in one of those nice shared keyed mail boxes. It's a shame because it looks like this would've worked great and this transaction wouldve been complete. What are we doing now? Tyler. THE BOX was TOO small. Lets do some math brian... How much space is lacking when you cram a 6.5 inch wide brittle center console in a 5.25inch box??? http://i335.photobucket.com/albums/m462/tjs91tsi/1986%20200sx%20Drift%20Car/Centerconsolepicsg54bstore020.jpg http://i335.photobucket.com/albums/m462/tjs91tsi/1986%20200sx%20Drift%20Car/Centerconsolepicsg54bstore012.jpg http://i335.photobucket.com/albums/m462/tjs91tsi/1986%20200sx%20Drift%20Car/Centerconsolepicsg54bstore019.jpg http://i335.photobucket.com/albums/m462/tjs91tsi/1986%20200sx%20Drift%20Car/Centerconsolepicsg54bstore016.jpg Notice the bulge?? DId you really think your BB gun cardboard and seran wrap would protect it? http://i335.photobucket.com/albums/m462/tjs91tsi/1986%20200sx%20Drift%20Car/Centerconsolepicsg54bstore007.jpg You should not be able to sell on this site if you continue to take advantage of people this way. You need tomake this right Brian.

I ended up purchasing this console from Brian. It showed up horribly packaged and in multiple pieces. Brian has stopped replying to any of my messages. I intend on giving feedback befitting this transaction and hope this post helps protect others from any more lousy behavior. BUYERS BEWARE. Pm me for details or pictures if needed. Tyler.

Whats up brother? Pm'd!

Hey. I have an 88 Starion. Looking for a mechanical fan and shroud from an earlier model shipped to 85710. Lmk Thank you. Call or text ideally, 520-235-5254. Thank you, Tyler.

You've got a pm.

Had some folks back out, these mafs are still available. They will come with the lid portion which isn't necessary as well as a used decent condition k&n airfilter. Call or text, 520-235-5254

Yea for an extra 10 to account for the part and shipping due to the larger box. it'll take a few more days to ship, that part is out at my garage, I can get to it this weekend.

Located in Tucson Az. I have a set of beige and brown manual seatbelts for sale. Came from a gold 84. the red emergency release buttons are sun faded and have some cracking. Text me for more pics if interested.http://i335.photobucket.com/albums/m462/tjs91tsi/image-38.jpg http://i335.photobucket.com/albums/m462/tjs91tsi/image-39.jpg http://i335.photobucket.com/albums/m462/tjs91tsi/image-37.jpg 50$ shipped Call or text, Tyler 520-235-5254

Hey guys, i have a few first gen dsm turbo maf sensors. One still has cardboard silencer and honeycomb. Also have a heavily modified maf, the entire lower section was removed. Have first gen accordian pipes as well let me know if interested. Unmodified maf. 45 shipped. I do not have pigtails! Modified maf, 35 shipped Parts located in Tucson Arizona. Call or text Tyler, 520-235-5254 Have A LOT of stock first gen dsm parts, engine, interior, etc... let me know if there is ANYthing you need. No more harnesses, or ecus. ( Do have a 90 EPROM ecu that needs some repair due to packrats)