AustinTSI Posted June 21, 2013 Report Share Posted June 21, 2013 I really want to get a twin plate clutch but they are really expensive for our car. What I want I would like to do is see if there is some other car out there that they make twin plate clutches that we could adapt to work on ours by maybe drilling new mounting holes. The other possibility is just finding other flywheels that have a 240mm clutch surface like ours and go from there. 240mm is correct right? for the 88-89 flywheels? Thankx, David. Link to comment Share on other sites More sharing options...
creakyjoints Posted June 22, 2013 Report Share Posted June 22, 2013 (edited) Only one I know of is actually what the cross reference it to. Turbo 2 rx7 of the same vintage. Edited June 22, 2013 by creakyjoints Link to comment Share on other sites More sharing options...
Pierre Posted July 2, 2013 Report Share Posted July 2, 2013 You try a twin disk for a 6 bolt eclipse, you also find most twin or triple disc clutches are smaller diameter than 240mm, usually 215mm 184mm and 133mm Link to comment Share on other sites More sharing options...
Recommended Posts