Jump to content



Anyone replace rotted frame rails?


  • Please log in to reply
4 replies to this topic

#1 Kevnic

Kevnic

    Member

  • Members
  • PipPipPip
  • 37 posts
  • Location:Albany, NY

Posted 16 January 2019 - 09:22 PM

I did a search a d it looks like there was a part number for these frame rails, although the post was from 2003.... So who knows. Was wondering if it was a major PITA. Some cars have slightly rotted rails and it's a shame.





#2 BC_99

BC_99

    Plays in traffic

  • Vendors
  • PipPipPipPip
  • 5,204 posts
  • Gender:Male
  • Location:Concord, NC
  • Model:Conquest

Posted 16 January 2019 - 09:45 PM

A lot of guys just cut out the rust, (if it isn't too bad) then plate them back in. I have parted out a few wrecked cars and have always drilled out the factory frame rails and sold them to other members. They are just spot welded in place and aren't too bad to remove, so replacing them should be a simple reverse procedure. Not a bad weekend job if you are handy with a welder.

BC
Steering coupler replacement U-Joints are available here...
http://www.starquest...howtopic=145280

Posted Image Posted Image Posted Image

#3 MotoCam360

MotoCam360

    Motocam360

  • Vendors
  • PipPipPip
  • 2,114 posts
  • Gender:Male
  • Location:Seattle
  • Interests:SQ, SY/TY, BMW, electronics, motorcycles, snowbikes
  • Model:Conquest

Posted 17 January 2019 - 03:58 AM

I have a set of rails on the shelf currently
Tim

My Feedback Link
'87 Red 5spd | '87 Atlantic Blue 5spd | '88 Yellow auto | '88 Fiji Auto | '89 Fiji auto
Posted Image
  New/Used SQ parts can be found on Ebay under "MotoCam360"
website: https://www.motocam3...ducts/starquest

#4 markp

markp

    Member

  • Members
  • PipPipPip
  • 83 posts
  • Gender:Male
  • Location:Greendale
  • Interests:Customizing cars
  • Model:Conquest

Posted 18 January 2019 - 01:50 PM

Ihad a big rusted out spot 4 /5 inches I took 2 L shaped angle iron pieces 18 inches long welded them together like a u shape and capped rust area and welded worked fine got metal from farm and fleet welding shop in store .

#5 freebird

freebird

    Established Member

  • Members
  • PipPipPip
  • 2,878 posts
  • Gender:Male
  • Location:lima,ohio
  • Interests:time is of no moment, but only what your doing
  • Model:Conquest

Posted 27 January 2019 - 04:58 PM

I have and it’s pretty easy for someone who’s fabricated things before. Be sure to use at least 14 gauge steel
Posted ImagePosted Image




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users