maxboost87 Posted December 24, 2009 Report Share Posted December 24, 2009 I seem to be getting a lot of interest on these bumpers i made, Ive been asked by a few people to start a GP to see if i can get enough starquester's together for it to be worth while, the more people that are interested the cheaper they will be. A rough estimate on price is $550 and there will more than likely be a 75% deposit so that i know people are serious about it and that will cover any materials and the payroll on almost all the time spent to build. A few things to know:~these will be constructed of high quality 16guage steel and must be welded on as a replacement panel" the same as if you were to buy a replacement "*quarter panel" and it is to be spot welded on professionally then finished. ~This does away with the entire rear bumper so you lose your 100+lbs of rusty scrap and swap on this 25lb unit. ~With that you also lose your rusty bracing so if you get rear ended your still gonna mess stuff up regardless." I could also offer a steel box tubing reinforcement plate to make up for it but that will be optional and have added cost and added shipping weight. ~Fuel tank can still be easily removed ~There will be no problem on special orders if it is possible, lets say if you: wanted 2 exhaust cutouts for a v8 converted vehicle, or wanted a round cutout over a square one which matches the twin tips very nicely..that is up to you. I hope this sees a lot of interest and let me know what you guys think ~Lee http://img136.imageshack.us/img136/3347/1001111.jpg http://img193.imageshack.us/img193/1727/1001106.jpg http://img27.imageshack.us/img27/1887/1001105a.jpg http://img193.imageshack.us/img193/1899/1001108z.jpg http://img26.imageshack.us/img26/8638/1001107g.jpg Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted December 24, 2009 Report Share Posted December 24, 2009 do you have any daytime pics? Quote Link to comment Share on other sites More sharing options...
maxboost87 Posted December 24, 2009 Author Report Share Posted December 24, 2009 Not any that really focus on the rear of the car, I will have some tomorrow Quote Link to comment Share on other sites More sharing options...
Turbo_84_Starion Posted December 24, 2009 Report Share Posted December 24, 2009 Make sure there's an option for the flatbody style too... I would be down for one plus the extra bracing down the road. Quote Link to comment Share on other sites More sharing options...
matt88 Posted December 27, 2009 Report Share Posted December 27, 2009 I would buy one. If you make it the will come!! lol At least I will. Quote Link to comment Share on other sites More sharing options...
maxboost87 Posted December 27, 2009 Author Report Share Posted December 27, 2009 As requested; http://img692.imageshack.us/img692/9321/0000291.jpg http://img199.imageshack.us/img199/3858/0000289b.jpg http://img130.imageshack.us/img130/1930/0000292.jpg http://img692.imageshack.us/img692/8528/0000293.jpg Quote Link to comment Share on other sites More sharing options...
BrazilBoy Posted December 27, 2009 Report Share Posted December 27, 2009 Very nice...What would freight charges be to 80123? Quote Link to comment Share on other sites More sharing options...
maxboost87 Posted December 27, 2009 Author Report Share Posted December 27, 2009 Package size would be 65"x24"x24" i'll do some checking around to see who has the best rates for a package that size. Quote Link to comment Share on other sites More sharing options...
DzNutz Posted December 28, 2009 Report Share Posted December 28, 2009 Very nice...What would freight charges be to 80537?Fixed it for ya Quote Link to comment Share on other sites More sharing options...
maxboost87 Posted December 28, 2009 Author Report Share Posted December 28, 2009 Ok...shipping would be right around $80 shipped to 80537 thats UPS ground and insured, its right on the girth limit...anything larger would cost like twice as much and be considered freight, so were pretty lucky Quote Link to comment Share on other sites More sharing options...
jwrape Posted December 29, 2009 Report Share Posted December 29, 2009 WOW! I love it, really streamlines the rear end. Quote Link to comment Share on other sites More sharing options...
zmds18 Posted January 6, 2010 Report Share Posted January 6, 2010 dude this mod along with my corvette tail light mod (that im gonna do) would be amaaaaaaaaaaazing..... someone with photo shop make the tail lights red and put there tail lights in there and we have perfection... so how much made and shipped total? http://whipgear.com/catalog/images/ipcw/LEDT-336CX-car-brake_big.jpg.gif Quote Link to comment Share on other sites More sharing options...
mdbgracing Posted January 6, 2010 Report Share Posted January 6, 2010 ld most likely be in on one. what would turn around time be on these once deposit is made. Quote Link to comment Share on other sites More sharing options...
maxboost87 Posted January 6, 2010 Author Report Share Posted January 6, 2010 (edited) Turn around time would be... shipped within 2-3 weeks from time of deposit. Deposits of $350 then rest must be paid in order to ship Total with shipping included $575, shipping is high because it is an over-sized reinforced box for protection, I may have to eat a few bucks on shipping depending on where its going to but that makes it easier than everyone having different shipping The more people that get in on this the better so i can order more than enough material at one time and pay one shipping cost on it but its not a big deal one-by one works too. Pay-Pal Payments need to be sent to wapsecret_2000@yahoo.com Money orders...what ever works Send e-mail's to maxboosttsi@gmx.com to confirm deposit and status or order that is my personal e-mail Edited January 9, 2010 by maxboost87 Quote Link to comment Share on other sites More sharing options...
Killtodie Posted January 7, 2010 Report Share Posted January 7, 2010 (edited) That is pretty hawt, I dont know about saving weight for the rear end, would kinda want more weight there and all. Is there anything that needs to be cut? Or does this just get weldon on? Think you can do something like this for the front end? Eliminating the front bumper and combining the air damn with the bumper as one piece, or maybe two. I know they have CF and FG air dams but those can get damage as easily, this not so. Would leave room for a bigger IC. Might still need to give it some form of reinforcement or a have it go with a lighter replacement bumper that can take a hit or something.obviously not to be welded to the fenders. maybe i'm just talking out my a** right now Edited January 7, 2010 by Killtodie Quote Link to comment Share on other sites More sharing options...
Jetspd150 Posted January 9, 2010 Report Share Posted January 9, 2010 The work looks good but it seems like something is missing still? To me it should be lower around the tank or a rap around. The more I look at it from the side view the more it looks like a Rustang from the back.Otherwise it does look good. Quote Link to comment Share on other sites More sharing options...
Jetspd150 Posted January 10, 2010 Report Share Posted January 10, 2010 I just realized what was missing the side vents. HAHA Quote Link to comment Share on other sites More sharing options...
billmongold Posted April 23, 2010 Report Share Posted April 23, 2010 whoa that roll pan is effing hawt. Quote Link to comment Share on other sites More sharing options...
BrazilBoy Posted April 23, 2010 Report Share Posted April 23, 2010 I will take one ounce I am back in the states, hopefully within a few months...shipping would be murder to hawaii... Quote Link to comment Share on other sites More sharing options...
BrazilBoy Posted October 14, 2010 Report Share Posted October 14, 2010 I will take one ounce I am back in the states, hopefully within a few months...shipping would be murder to hawaii...I plan on keeping my word, I need to get some other items sorted on mine then I will be a go for this...How much lead time do you need to get one done? Quote Link to comment Share on other sites More sharing options...
pigpen Posted October 15, 2010 Report Share Posted October 15, 2010 definitely interested! Quote Link to comment Share on other sites More sharing options...
MikeMeyerhoff Posted October 22, 2010 Report Share Posted October 22, 2010 Build it and they will come. Quote Link to comment Share on other sites More sharing options...
sleeper tsi Posted March 28, 2012 Report Share Posted March 28, 2012 Also definately interested:) not a fan of the steps Quote Link to comment Share on other sites More sharing options...
Frenchi934 Posted March 29, 2012 Report Share Posted March 29, 2012 Also definately interested:) not a fan of the stepsyou just bumped a 2 year old group purchase man.. Quote Link to comment Share on other sites More sharing options...
Mike_StarionTSI Posted March 30, 2012 Report Share Posted March 30, 2012 lmao nice bump. Shame....it doesnt seem it was ever made. They look pretty nice. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.