Jump to content

83Starion-11

Members
  • Posts

    142
  • Joined

  • Last visited

About 83Starion-11

  • Birthday 08/20/1990

Contact Methods

  • MSN
    annelson11@live.com
  • Yahoo
    annelson11@yahoo.com

Profile Information

  • Interests
    My Starion and Snowboarding
  • Location
    Vancouver, WA
  • Gender
    Male

Previous Fields

  • Zip Code
    98660
  • Model
    Starion
  • Type
    Other
  • Model Year
    1983
  • Transmission Type
    Manual
  • Factory Color
    Palermo Gray
  • Interior Color
    Dark Red
  • Status
    Restoring

83Starion-11's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. Connection on the coil + and - are all tight and good as well. Fuel filers are new, and fuel pump tested good.
  2. Ok update on this. So finally got around to having the injectors cleaned and tested , they both tested good and no leaks. The paper work says 115-116cc flow??? They part on the injectors are 850cc...So I am a bit confused there. Going to talk with the guy on it tomorrow. Car runs great at idol and I can drive around, but once into boost, it studderS a bit. I am going to check fuel pressure as well when I can. Any recommendations for a fuel pressure gauge?
  3. "Schneider 6610 Heavy Duty valve spring kit. 100lb seat pressure @ 1.600. Open pressure @ .500 is 180lbs. Coil binds at .900." Was bought to use in my rebuild, but never used. Just selling to send them to a good home, includes price to ship. Paypal Only Thank you, Andrew
  4. It took us about six months to find, and they were OEM and have been sitting since for 30 years plus, but we had them cleaned and checked and they run good, I was thinking maybe the fuel pressure is all messed up as well, but haven't been able to measure it yet :/ The company we bought them from said they were hiding on a back shelf and were the only ones left lol...they didn't even think they had them still...
  5. Hey all, I recently put in a set of new 83' injectors on my 83' starion, and now I can't boost...The car is completely stock, but I have replaced more original parts then I can list. The car can idol great, rev up great (curb side), but when I get to about 3000 RPM driving, or get into the boost (in any gear), my RPM guauge skips around and the car stumbles...not sure what causes this. If anyone has any ideas or questions please let me know. There is no fuel smell and exhaust is clean, turbo feels good and Is not leaking... Could it be a bad coil pack? Timing off? Thanks! I hope to drive her again soon. -Andrew
  6. Thank for the replies! Moto I sent a PM, and ok I just need Injectors, but I am just short of buying the entire car to get them haha, so if I have to buy the whole throttle body so be it
  7. My 83' starion's injectors are toast after 30 years of use, and I have no way repair or fix them (have tired many time) Looking to buy a pair of 83' injectors...if anyone is willing to help me out here or part with their, would of course need them to be a known working. It is the only piece I need to get my car back on the road -Andrew Paypal on standby
  8. ZacMan, I was able to get the exact O-rings for the car from the list, and just put them in yesterday, and no leak anymore! The injectors look to be flowing well. Thank you! -Andrew
  9. Ya sorry, it is right where the wires are going into the TBI for the injectors :/ I am not sure what to do from here...and I have replaced all O-rings on injectors...I read that if the injectors are plugged or bad it can cause pressure to build up and blow out the top?
  10. I have a stock 83' which was running great for 5 years, and all of a sudden, my fuel stars to leak out of the TBI...literally coming out like a sprinkler... I have taken apart the entire TBI and replaced the gaskets, but there seems to be a ton of pressure on top causing it to spew from the rubber seal...does anyone know why there may be pressure? I have attached a picture, it is the rubber seal on the outside there which I know goes inside, and it is leaking very badly when turning the car over...why is there so much pressure in there to begin with? Could I have bad injectors? -Andrew
  11. He will post more pics when he can, he can't post right now because of the new member thing lol. Any special request for pics ?
  12. Someone should make one and sell it to me lol...In real, does anyone know where we can get one made?
  13. Hey guys, anyone out there have a known good stock 1G BOV? Let me know if so Paypal Ready
×
×
  • Create New...