Jump to content



Lash valve adjustment


  • Please log in to reply
2 replies to this topic

#1 bigjoe

bigjoe

    Established Member

  • Members
  • PipPipPip
  • 733 posts
  • Gender:Male
  • Location:springfield ma
  • Model:Starion

Posted 06 June 2017 - 01:49 PM

U need the specs for mechanical head valve adjusting the head





#2 NotStock88

NotStock88

    Established Member

  • Members
  • PipPipPip
  • 4,430 posts
  • Gender:Male
  • Location:Midwest
  • Model:Conquest

Posted 07 June 2017 - 07:42 AM

Ensure engine is at normal operating temperature.
Position No. 1 cylinder at TDC of compression stroke to adjust intake valve Nos. 1 and 2 and exhaust valve Nos. 1 and 3. Loosen nut and adjust intake valves to.006 inch and exhaust valves to.010 inch.
Tighten nut. After nut has been tightened, ensure valve clearances are correct.
Position No. 4 cylinder to TDC of compression stroke to adjust intake valve Nos. 3 and 4 and exhaust valve Nos. 2 and 4. Loosen nut and adjust intake valves to.006 inch and exhaust valves to.010 inch.
Tighten nut. After nut has been tightened, ensure valve clearances are correct.

NOOB

#3 IntercooledFlatty

IntercooledFlatty

    Get Sum

  • Members
  • PipPipPipPipPip
  • 14,235 posts
  • Gender:Male
  • Location:Schwetty BallZ Louisiana
  • Model:Starion

Posted 07 June 2017 - 10:20 AM

i so need to do this as i need to change the VC gasket too... BEFORE PF :P
Posted Image Posted Image

FLATNESS RULEZ




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users