Xtclink Posted September 4, 2013 Report Share Posted September 4, 2013 So if I had a question about a engine but not the 54b while at the same time trying to seek about the knowledge base of the awesome where would I post this question =) If a mate a 4g63 turbo trans to a n/t 6bolt block can I retain the n/a flywheel and starter? Link to comment Share on other sites More sharing options...
Shelby Posted September 5, 2013 Report Share Posted September 5, 2013 come on one of you DSM guys,, this is one i'm working on ,,need info i'm fairly sure the starter will work but the turbo position for the starter appears to be further out from the na fly wheel so i'm guessing the turbo fly wheel is of a larger dia stupid car had an aftermarket clutch disk a full 8 1/2 inch disk , making it compare to a 225 and 240 mm disk over any oem listings oh one other thing I had 2 diff store guys tell me you don't measure a clutch disk on the flat side you measure over the hub to get the disk size ,, what idoit would come up with doing that Link to comment Share on other sites More sharing options...
Recommended Posts