Jump to content



Front End Rebuild Quick Chart


  • Please log in to reply
19 replies to this topic

#1 89PalermoSHP

89PalermoSHP

    Advanced Member

  • Members
  • PipPipPipPip
  • 7,457 posts
  • Gender:Male
  • Location:St Paul, MN
  • Interests:Starquests
  • Model:Conquest

Posted 22 January 2008 - 01:12 PM

Here is a chart with all of the components and part numbers for your front end rebuild. I also included the part numbers below the pic for your copy-and-paste ease along with the prices from www.mitsubishiparts.net

ALL parts are confirmed available.

Posted Image

-----------------------------------------------------------------------------------------
1-  MS440002    ...(3)   ...$1.40
2-  MB166906    ...(1)   ...$60.17
3-  MB192278    ...(2)   ...$4.46
4-  MA123128    ...(1)   ...$1.79
5-  MF445243    ...(1)   ...$3.90  
6-  MA180199    ...(3)   ...$5.00
7-  MB412926    ...(2)   ...$25.26
8-  MF472054    ...(4)   ...$0.29
9-  MB122128    ...(4)   ...$0.79
10-  MA151855    ...(4)   ...$6.16
11-  MA159987    ...(2)  ...$0.78
12-  MB166930    ...(1)  ...$1.81
13-  MB166981    ...(1)  ...$32.35
14-  MB489447    ...(1)  ...$103.30
15-  MF472054    ...(2)  ...(See #8 )
16-  MB192561    ...(1)  ...$0.71
17-  MB076000    ...(2)  ...$6.16
18-  MF430726    ...(2)  ...$0.67
19-  MU103001    ...(2)  ...$1.97
20-  MB122128    ...(1)  ...$0.79
21-  MB166980    ...(1)  ...$32.35
22-  MB303958    ...(1)  ...$1.16
23-  MB109857    ...(1)  ...$6.79
24-  MB347485    ...(1)  ...$57.98
25-  MB347490    ...(2)  ...$4.86
26-  MB347489    ...(2)  ...$13.96

Edited by 89PalermoSHP, 21 April 2011 - 12:15 PM.

Posted Image
Low-Temp Radiator Fan Sensors-$14-select the last option for shipping thru USPS and shipping is 95 cents!!! <----These work very well!!
My 89 Conquest
My custom hoses
1st Place winner "Other Mitsubishi" category- All Mitsubishi Cookout and Car Show, 2010, 2011





#2 Richie_Rich

Richie_Rich

    Established Member

  • Members
  • PipPipPip
  • 4,775 posts
  • Gender:Male
  • Location:Holiday Shores, IL
  • Interests:More Fun Per Gallon
  • Model:Conquest

Posted 22 January 2008 - 02:00 PM

I'll be interested to hear if the center drag link #14 is still available.

I heard it wasn't, but I never confirmed.
SOLD off into prostitution 08-28-2010
'88 Fiji - 8:1-40ovr Wiseco's, Schndr 6610 springs,Updated TPS sensor
Kelly's 3" exh, MSD 8.8Spr Cndctr wires, Welderwiz's vacuum hoses, Stock turbo, 1G MAS
ProfecB-II, Fidanza

#3 importwarrior

importwarrior

    6 Quests and Counting......

  • Moderators
  • PipPipPipPipPip
  • 18,309 posts
  • Gender:Male
  • Location:Manassas VA
  • Interests:Boost = 2KWIK4U
    Starquests
  • Model:Conquest

Posted 22 January 2008 - 02:03 PM

yes i could probably use one.

B-71 87 TSI ~ RIP

Black 87 Starion ~ Mess SOLD!!!

Proud New 89 slightly Rusted Fiji Owner !!!




#4 Xtreme Industries

Xtreme Industries

    Established Member

  • Members
  • PipPipPip
  • 1,538 posts
  • Gender:Male
  • Location:Calgary, Alberta
  • Interests:cars
  • Model:Conquest

Posted 22 January 2008 - 02:25 PM

you should place a description of what the part number is refering to so we know what we are looking for.
2010 Camaro RS - long tube headers, intake isolator, injen intake, ported throtle body, eibach lowering springs, eibach sway bars, pypes cat back exhaust, rx catch can, transformers decals.
1987 Conquest TSI, 5 spd, B71- 3" *DM Exhaust, Hooker ACM, Hood Struts, Taylor wires, silicone vac lines, fidanza, ACT Extreme, MK1 hard pipes, mbc (13psi), MK1 Shifter, MK1 steering wheel, silicone rad hoses, shp wheels - RIP
1991 BMW 318i - RIP

#5 JAinsworth

JAinsworth

  • Moderators
  • PipPipPipPipPip
  • 16,896 posts
  • Gender:Male
  • Location:Lizella Georgia
  • Model:Conquest

Posted 22 January 2008 - 02:49 PM

QUOTE (Xtreme Industries)
you should place a description of what the part number is refering to so we know what we are looking for.


Frank, look again :wink:

#6 jspecgallant

jspecgallant

    Member

  • Members
  • PipPipPip
  • 414 posts
  • Gender:Male
  • Location:Dumfries, VA
  • Interests:God, Family, dsm / starquest, and making more money
  • Model:Conquest

Posted 24 January 2008 - 06:36 PM

Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out.

Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop?

#7 DasGunner

DasGunner

    Member

  • Members
  • PipPipPip
  • 1,266 posts
  • Gender:Male
  • Location:Baltimore,Maryland
  • Interests:Reefkeeping...Guns...Cars...
  • Model:Starion

Posted 24 January 2008 - 06:57 PM

It is avilable i purchase one from Rockville for $104 over the summer laugh.gif


[Sully] 8:25 pm: I'm telling you guys.. these cars are meant to turn.... if you want to
go straight, go buy a mustang or something.

#8 Richie_Rich

Richie_Rich

    Established Member

  • Members
  • PipPipPip
  • 4,775 posts
  • Gender:Male
  • Location:Holiday Shores, IL
  • Interests:More Fun Per Gallon
  • Model:Conquest

Posted 24 January 2008 - 07:42 PM

QUOTE (jspecgallant)
Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out.

Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop?

Dad is an engine machine shop.

I don't know that any type of machine shop could rebuild it.
SOLD off into prostitution 08-28-2010
'88 Fiji - 8:1-40ovr Wiseco's, Schndr 6610 springs,Updated TPS sensor
Kelly's 3" exh, MSD 8.8Spr Cndctr wires, Welderwiz's vacuum hoses, Stock turbo, 1G MAS
ProfecB-II, Fidanza

#9 89PalermoSHP

89PalermoSHP

    Advanced Member

  • Members
  • PipPipPipPip
  • 7,457 posts
  • Gender:Male
  • Location:St Paul, MN
  • Interests:Starquests
  • Model:Conquest

Posted 24 January 2008 - 09:43 PM

So would these parts completely rebuild the front end?
#14- X1
#7-  X2
#13- X1
#21- X1
#24- X1
#23- X1
Posted Image
Low-Temp Radiator Fan Sensors-$14-select the last option for shipping thru USPS and shipping is 95 cents!!! <----These work very well!!
My 89 Conquest
My custom hoses
1st Place winner "Other Mitsubishi" category- All Mitsubishi Cookout and Car Show, 2010, 2011

#10 jspecgallant

jspecgallant

    Member

  • Members
  • PipPipPip
  • 414 posts
  • Gender:Male
  • Location:Dumfries, VA
  • Interests:God, Family, dsm / starquest, and making more money
  • Model:Conquest

Posted 25 January 2008 - 10:58 AM

QUOTE (Richie_Rich)
QUOTE (jspecgallant)
Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out.

Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop?

Dad is an engine machine shop.

I don't know that any type of machine shop could rebuild it.


I have really looked at mine, isn't the ends almost like a tie rod?

I was more of thinking of cutting the ends off and tapping the relay rod, then attaching a tie rod. Or modify one from like a ford or chevy but can also check if there is one out there that you can buy at your local parts store. (good idea or just a brain fart)

#11 damurida

damurida

    Member

  • Members
  • PipPipPip
  • 234 posts
  • Gender:Male
  • Location:nashville tn
  • Model:Conquest

Posted 27 January 2008 - 01:34 AM

top end has them for like $156.00 but the chrysler dlr in gallatin, tn can   still order them... there $200.00 bucks though.. special order

#12 Richie_Rich

Richie_Rich

    Established Member

  • Members
  • PipPipPip
  • 4,775 posts
  • Gender:Male
  • Location:Holiday Shores, IL
  • Interests:More Fun Per Gallon
  • Model:Conquest

Posted 27 January 2008 - 11:07 AM

QUOTE (jspecgallant)
QUOTE (Richie_Rich)
QUOTE (jspecgallant)
Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out.

Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop?

Dad is an engine machine shop.

I don't know that any type of machine shop could rebuild it.


I have really looked at mine, isn't the ends almost like a tie rod?

I was more of thinking of cutting the ends off and tapping the relay rod, then attaching a tie rod. Or modify one from like a ford or chevy but can also check if there is one out there that you can buy at your local parts store. (good idea or just a brain fart)


This is why you can't cut off the ends and tap or thread them.
I suppose where the idler arm is you may, but on the driver's side where the pitman arm connects is too close.

SOLD off into prostitution 08-28-2010
'88 Fiji - 8:1-40ovr Wiseco's, Schndr 6610 springs,Updated TPS sensor
Kelly's 3" exh, MSD 8.8Spr Cndctr wires, Welderwiz's vacuum hoses, Stock turbo, 1G MAS
ProfecB-II, Fidanza

#13 Edde

Edde

    Still Dead

  • Members
  • PipPipPipPipPip
  • 11,127 posts
  • Gender:Male
  • Location:We are EVERYWHERE
  • Model:Conquest

Posted 29 January 2008 - 09:03 PM

I think it's still available, but it's the only part N/A aftermarket  sad.gif
Posted Image

#14 89PalermoSHP

89PalermoSHP

    Advanced Member

  • Members
  • PipPipPipPip
  • 7,457 posts
  • Gender:Male
  • Location:St Paul, MN
  • Interests:Starquests
  • Model:Conquest

Posted 30 January 2008 - 04:57 AM

I ordered 7, 13, 21, 24, 14, 22, 23, and 11 today. Everything is shown as ordered so far. Ill update if anything comes back NLA.
Posted Image
Low-Temp Radiator Fan Sensors-$14-select the last option for shipping thru USPS and shipping is 95 cents!!! <----These work very well!!
My 89 Conquest
My custom hoses
1st Place winner "Other Mitsubishi" category- All Mitsubishi Cookout and Car Show, 2010, 2011

#15 Richie_Rich

Richie_Rich

    Established Member

  • Members
  • PipPipPip
  • 4,775 posts
  • Gender:Male
  • Location:Holiday Shores, IL
  • Interests:More Fun Per Gallon
  • Model:Conquest

Posted 30 January 2008 - 07:57 AM

What was your total cost?
SOLD off into prostitution 08-28-2010
'88 Fiji - 8:1-40ovr Wiseco's, Schndr 6610 springs,Updated TPS sensor
Kelly's 3" exh, MSD 8.8Spr Cndctr wires, Welderwiz's vacuum hoses, Stock turbo, 1G MAS
ProfecB-II, Fidanza

#16 89PalermoSHP

89PalermoSHP

    Advanced Member

  • Members
  • PipPipPipPip
  • 7,457 posts
  • Gender:Male
  • Location:St Paul, MN
  • Interests:Starquests
  • Model:Conquest

Posted 30 January 2008 - 11:50 AM

$316 shipped- keep in mind there were 2 of a couple things.

I meant to throw ball joints in as well so that will be another $60 or so.
Posted Image
Low-Temp Radiator Fan Sensors-$14-select the last option for shipping thru USPS and shipping is 95 cents!!! <----These work very well!!
My 89 Conquest
My custom hoses
1st Place winner "Other Mitsubishi" category- All Mitsubishi Cookout and Car Show, 2010, 2011

#17 89PalermoSHP

89PalermoSHP

    Advanced Member

  • Members
  • PipPipPipPip
  • 7,457 posts
  • Gender:Male
  • Location:St Paul, MN
  • Interests:Starquests
  • Model:Conquest

Posted 15 February 2008 - 04:24 AM

I got my order today and everything needed to rebuild the front end is still available.
Posted Image
Low-Temp Radiator Fan Sensors-$14-select the last option for shipping thru USPS and shipping is 95 cents!!! <----These work very well!!
My 89 Conquest
My custom hoses
1st Place winner "Other Mitsubishi" category- All Mitsubishi Cookout and Car Show, 2010, 2011

#18 Richie_Rich

Richie_Rich

    Established Member

  • Members
  • PipPipPip
  • 4,775 posts
  • Gender:Male
  • Location:Holiday Shores, IL
  • Interests:More Fun Per Gallon
  • Model:Conquest

Posted 15 February 2008 - 09:33 PM

QUOTE (89PalermoSHP)
I got my order today and everything needed to rebuild the front end is still available.

Totally cool.
Thanks for the update and following through with this.
SOLD off into prostitution 08-28-2010
'88 Fiji - 8:1-40ovr Wiseco's, Schndr 6610 springs,Updated TPS sensor
Kelly's 3" exh, MSD 8.8Spr Cndctr wires, Welderwiz's vacuum hoses, Stock turbo, 1G MAS
ProfecB-II, Fidanza

#19 Xtreme Industries

Xtreme Industries

    Established Member

  • Members
  • PipPipPip
  • 1,538 posts
  • Gender:Male
  • Location:Calgary, Alberta
  • Interests:cars
  • Model:Conquest

Posted 10 March 2008 - 01:53 PM

i have no idea what each part number is refering to. i have stockpiled a bunch of stuff and dont want to order duplicate stuff nor do i want to waste my part suppliers time by looking up everything and telling me what it is.

can anyone list what each part number is refering to?
2010 Camaro RS - long tube headers, intake isolator, injen intake, ported throtle body, eibach lowering springs, eibach sway bars, pypes cat back exhaust, rx catch can, transformers decals.
1987 Conquest TSI, 5 spd, B71- 3" *DM Exhaust, Hooker ACM, Hood Struts, Taylor wires, silicone vac lines, fidanza, ACT Extreme, MK1 hard pipes, mbc (13psi), MK1 Shifter, MK1 steering wheel, silicone rad hoses, shp wheels - RIP
1991 BMW 318i - RIP

#20 slowquest

slowquest

    Maybe someday, I'll be FastQuest

  • Members
  • PipPipPip
  • 2,513 posts
  • Gender:Male
  • Location:Cincinnati
  • Model:Conquest

Posted 10 March 2008 - 05:46 PM

QUOTE (Xtreme Industries @ Mar 10 2008, 07:53 PM) <{POST_SNAPBACK}>
i have no idea what each part number is refering to. i have stockpiled a bunch of stuff and dont want to order duplicate stuff nor do i want to waste my part suppliers time by looking up everything and telling me what it is.

can anyone list what each part number is refering to?



If you look at the picture, all parts are numbered, with a part number. reference each of those with the price list below the picture....




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users