Boosted_One Posted May 11, 2002 Report Share Posted May 11, 2002 http://www.jcwhitney.com/product.jhtml?CATID=14721 Good resource for people wanting to make their own exhaust or hardpipes,etc Link to comment Share on other sites More sharing options...
Gary Posted May 20, 2002 Report Share Posted May 20, 2002 http://www.roadraceengineering.com/mandrelbends.htm Link to comment Share on other sites More sharing options...
Edde Posted May 20, 2002 Report Share Posted May 20, 2002 jhttp://www.roadraceengineering.com/mandrelbends.htm The links messed up - drop out the "J" at beginning. Edde Link to comment Share on other sites More sharing options...
kev Posted May 22, 2002 Report Share Posted May 22, 2002 http://www.roadraceengineering.com/mandrelbends.htm Note that this page also has a tip that is 3" in and dual 2.5" out! This is great to maintain the stock look but have a better breathing 3" exhaust system. kev Link to comment Share on other sites More sharing options...
Motorhead Posted May 23, 2002 Report Share Posted May 23, 2002 You can also get U bends and J bends at jeggs or summit racing, I do know that jeggs has the U bends in 3" and are about $20.00 each with free shipping. I believe the web site for jeggs is www.jeggs.com, dont know about summit. Link to comment Share on other sites More sharing options...
BullShipper Posted May 30, 2002 Report Share Posted May 30, 2002 Instead of getting prebent tubes couldn't I just go to a good exhaust shop and they could make one for me with mandrel bent tubes? Link to comment Share on other sites More sharing options...
kev Posted May 30, 2002 Report Share Posted May 30, 2002 If the shop has a mandral bending machine, they could bend a st8 piece of tubing to meet your needs. However most shops do not have this machine and the ones who do will most likely charge more to bend them then it would cost to buy the bends from JC Whitney. kev Link to comment Share on other sites More sharing options...
Tim_C. Posted June 4, 2002 Report Share Posted June 4, 2002 That roadraceengineering site is way overpriced. Stick with JC Whitney for the same tube at nearly half the cost. I did a complete 2.5" Mandrel exhaust from the turbo back for under $200. I did however just used a Pace Setter 2 1/2" Monza resonator tip for the muffler. 4" Pencil Tip. It is louder, but flows very well, and sounds tough. Tim C. Link to comment Share on other sites More sharing options...
Crash Posted June 11, 2002 Report Share Posted June 11, 2002 I like what JC Whitney offers, has anyone used this and do you have some sort of diagram so I order the right parts? Crash Link to comment Share on other sites More sharing options...
ihavenoname Posted November 17, 2004 Report Share Posted November 17, 2004 I am planning on doing 2 1/2 exhaust sometime here soon i already have a downpipe, thanks for the help Marcus Link to comment Share on other sites More sharing options...
sanitariumite Posted November 17, 2004 Report Share Posted November 17, 2004 The summit's website is www.summitracing.com Adam Link to comment Share on other sites More sharing options...
Professor Quest Posted December 20, 2004 Report Share Posted December 20, 2004 Many race car building shops have a mandrel bender. Link to comment Share on other sites More sharing options...
ChadC Posted December 23, 2004 Report Share Posted December 23, 2004 You can also get U bends and J bends at jeggs or summit racing, I do know that jeggs has the U bends in 3" and are about $20.00 each with free shipping. I believe the web site for jeggs is www.jeggs.com, dont know about summit. drop one g - www.jegs.com Link to comment Share on other sites More sharing options...
boostvr4 Posted January 4, 2005 Report Share Posted January 4, 2005 How about aluminum mandrel bends? good for Intercooler pipes! http://www.diamondstarmotorsport.com/diyparts.shtml Link to comment Share on other sites More sharing options...
luuke211 Posted February 5, 2005 Report Share Posted February 5, 2005 www.magnumforce.com Link to comment Share on other sites More sharing options...
Recommended Posts