Jump to content



Dissasemble the c/v axle inner joint


  • Please log in to reply
4 replies to this topic

#1 JohnnyWadd

JohnnyWadd

    Advanced Member

  • Banned
  • PipPipPipPip
  • 8,936 posts
  • Gender:Male
  • Location:Oregon
  • Model:Conquest

Posted 11 September 2014 - 04:16 PM

I was told by some people that it does not come apart so here is a little info

The joint is held together by this clip on the inside...

Posted Image

To overcome it use a punch and hammer on the race (star shaped thing)....

I used a prybar like this. You can actually lay it on the floor or bench and get it once with a good size hammer and it will pop right apart...

Posted Image

Going back together is the same concept, help the circlip by collapsing it a little initially..get it in the groove...

Posted Image

Then do this...a dead blow hammer or soft hammer might be preffered but if you just give it one good hit it will go home and not hurt a thing

Posted Image

Lube the shaft first as well...

Posted Image

The cage and ball can come in/out too...

To get the balls out use a big shaft or screwdriver to angle the race and cage at extremes....this is how they go in and come out...do one ball and then do the one directly across from it. you will be temped to get the others out that are expose when you do this  but trust me this is the best way.

Posted Image

Posted Image

One all the balls are out the cage and race will come too. Two things to be aware of here is the large slots in the cage....

Posted Image

Posted Image

And the cage has an inner and outer part two separate I.D. dimensions. Bigger one outside...

Posted Image

Posted Image

The larger slots in the cage is your key to getting the race out and then next the cage with come too.

More pics here
http://s1187.photobu...d?sort=3&page=1


assistance is always nice tooo

Posted Image

Edited by JohnnyWadd, 11 September 2014 - 04:27 PM.






#2 Funky Phil

Funky Phil

    Super Pooper

  • Members
  • PipPipPipPip
  • 6,333 posts
  • Gender:Male
  • Location:Hell's microwave TX
  • Interests:2 streaks of fire for 60ft when I leave.
  • Model:Conquest

Posted 12 September 2014 - 05:09 AM

Thats how I do it.
10.95@122mph MoFuggin stickshift! https://m.youtube.co...h?v=8Q01UKt5q4U

Posted Image

#3 randy

randy

    Established Member

  • Members
  • PipPipPip
  • 4,082 posts
  • Interests:Starquests forever!
  • Model:Other

Posted 12 September 2014 - 05:15 AM

Nice illustration and write up.

#4 BC_99

BC_99

    Plays in traffic

  • Vendors
  • PipPipPipPip
  • 5,107 posts
  • Gender:Male
  • Location:Concord, NC
  • Model:Conquest

Posted 13 September 2014 - 10:06 AM

Fantastic write Johnny. Mods, this should be stickied in the FAQs.

BC_99

Edit: I guess I should have been more specific. Perhaps we should try here for the sticky.

http://www.starquest...hp?showforum=61

instead of the "Site Features" FAQs.

I kind of thought that was obvious, but I guess it wasn't.

Edited by BC_99, 13 September 2014 - 04:48 PM.

Steering coupler replacement U-Joints are available here...
http://www.starquest...howtopic=145280

Posted Image Posted Image Posted Image

#5 importwarrior

importwarrior

    6 Quests and Counting......

  • Moderators
  • PipPipPipPipPip
  • 17,650 posts
  • Gender:Male
  • Location:Manassas VA
  • Interests:Boost = 2KWIK4U
    Starquests
  • Model:Conquest

Posted 03 October 2014 - 05:23 AM

Moved To FAQ

B-71 87 TSI ~ RIP
Black 87 Starion ~ Mess SOLD!!!
Proud New 89 slightly Rusted Fiji Owner !!!

The Ark was built by amateurs , the Titanic was built by Professionals.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users