reidracing2000 Posted August 6, 2012 Report Share Posted August 6, 2012 I'm parting out my 87' 2.6 motor to do a motor swap. I have everything, The crank will need to be polished....I spun a rod bearing a while ago and was gonna rebuild it but I have changed my mind. I have a new, still in the package, AJUSA head gasket that I got from engine machine service and I also have all the lower and upper gaskets, all brand new. Tranny shifts great..No grinds or slips. Clutch has 600 miles on it. It's a stage one clutch from eBay......Have all the stock intercooler piping, stock intercooler, pretty much everything needed to put back together. The pistons and rods are still good, Just need new main and rod bearings. The head has no cracks. The block is cleaned up and ready to go. I will have pics up soon. Make offer on parts you need or want. Please PM me or call/text 815-302-6897. Thanks, Brad Will be posting more here in the next few days. I still need to pull the ECU and all that good stuff. Quote Link to comment Share on other sites More sharing options...
TexasQuest Posted August 6, 2012 Report Share Posted August 6, 2012 pm'd Quote Link to comment Share on other sites More sharing options...
mstieg Posted August 7, 2012 Report Share Posted August 7, 2012 (edited) PM sent. I'll take the upper & lower gasket sets for sure if Tex didn't beat me to them. I might also want the AJUSA and will let you know very soon. If I miss out on that, I miss out. Edited August 7, 2012 by mstieg Quote Link to comment Share on other sites More sharing options...
koulbreeze Posted August 30, 2012 Report Share Posted August 30, 2012 what do you want for the head? Quote Link to comment Share on other sites More sharing options...
termiteman75 Posted September 7, 2012 Report Share Posted September 7, 2012 Do you have a exhaust manifold un cracked and with the four studs intact? 1 Quote Link to comment Share on other sites More sharing options...
euphoria Posted September 8, 2012 Report Share Posted September 8, 2012 How much for the crank shipped to 28425? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted September 10, 2012 Report Share Posted September 10, 2012 What pistons are they? Quote Link to comment Share on other sites More sharing options...
reidracing2000 Posted September 10, 2012 Author Report Share Posted September 10, 2012 stock pistons Quote Link to comment Share on other sites More sharing options...
RWDAddict Posted September 10, 2012 Report Share Posted September 10, 2012 I'll take the Ajusa, how much you looking for it? Quote Link to comment Share on other sites More sharing options...
brianpaul98 Posted September 11, 2012 Report Share Posted September 11, 2012 stock pistons Ahh ok, I thought maybe they were forged. Thanks Quote Link to comment Share on other sites More sharing options...
koulbreeze Posted September 11, 2012 Report Share Posted September 11, 2012 need to order my head today, please get back to me Quote Link to comment Share on other sites More sharing options...
conquestowner1 Posted September 27, 2012 Report Share Posted September 27, 2012 what's up, how much for the block and how much to ship to 32226thanks conquestowner1 Quote Link to comment Share on other sites More sharing options...
shawn36s Posted October 26, 2012 Report Share Posted October 26, 2012 Will you sell the oil filter bracket and fitting for the turbo feed line seperately from the block? Quote Link to comment Share on other sites More sharing options...
brucie08 Posted October 27, 2012 Report Share Posted October 27, 2012 Do you have the engine side of the harness by chance? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.