Back again and freshly rebuilt in Southern MD

[Martsubishi10]

Howdy,

First Id like to give a big thanks to Randy and the rest of the folks at EMS. I am so impressed with your work. My Conquest belonged to my late bro who had it originally built with machine work from Rapetep. They did a horrible job. The block was decked uneven by .007" towards the back and the pistons were too small for the bore. He of course didn't know this so we drove it that way for about 5k before it fin ally spun a bearing. I have it bored to 92mm and a fresh set of wiseco's, clevite 77 mains, BSE, perfect circle rod bearings, race prepped and bushed rods, new Mitsubishi oil pump. The head features an Adjusa hg and all new valves springs and lifters. I reused the camshaft. I admit I winged it but it checked out ok. I am currently running a 19C in a bored out MHI housing with 20 PSI of boost. This car is an excellent daily driver with phenomenal short burst capabilities. I work the night shift in DC so traffic is usually never an issue, and I love blasting up and down the freeway when the coast is clear. This car has been in the family since early 03 amd I intend to keep it running strong and happy.

[randy]

good luck with the cars build.

[importwarrior]

sounds nice. post up some pics.

[Martsubishi10]

I'm working on the pics issue. I attempted to set my profile picture from a photo bucket upload, but was told the file was still too big. I'll get the problem solved soon though!