89PalermoSHP Posted January 22, 2008 Report Share Posted January 22, 2008 (edited) Here is a chart with all of the components and part numbers for your front end rebuild. I also included the part numbers below the pic for your copy-and-paste ease along with the prices from www.mitsubishiparts.net ALL parts are confirmed available. http://i177.photobucket.com/albums/w202/89PalermoSHP/alternative.jpg ----------------------------------------------------------------------------------------- 1- MS440002 ...(3) ...$1.40 2- MB166906 ...(1) ...$60.17 3- MB192278 ...(2) ...$4.46 4- MA123128 ...(1) ...$1.79 5- MF445243 ...(1) ...$3.90 6- MA180199 ...(3) ...$5.00 7- MB412926 ...(2) ...$25.26 8- MF472054 ...(4) ...$0.29 9- MB122128 ...(4) ...$0.7910- MA151855 ...(4) ...$6.1611- MA159987 ...(2) ...$0.7812- MB166930 ...(1) ...$1.8113- MB166981 ...(1) ...$32.3514- MB489447 ...(1) ...$103.3015- MF472054 ...(2) ...(See #8 )16- MB192561 ...(1) ...$0.7117- MB076000 ...(2) ...$6.1618- MF430726 ...(2) ...$0.6719- MU103001 ...(2) ...$1.9720- MB122128 ...(1) ...$0.7921- MB166980 ...(1) ...$32.3522- MB303958 ...(1) ...$1.1623- MB109857 ...(1) ...$6.7924- MB347485 ...(1) ...$57.9825- MB347490 ...(2) ...$4.8626- MB347489 ...(2) ...$13.96 Edited April 21, 2011 by 89PalermoSHP Link to comment Share on other sites More sharing options...
Richie_Rich Posted January 22, 2008 Report Share Posted January 22, 2008 I'll be interested to hear if the center drag link #14 is still available. I heard it wasn't, but I never confirmed. Link to comment Share on other sites More sharing options...
importwarrior Posted January 22, 2008 Report Share Posted January 22, 2008 yes i could probably use one. Link to comment Share on other sites More sharing options...
Xtreme Industries Posted January 22, 2008 Report Share Posted January 22, 2008 you should place a description of what the part number is refering to so we know what we are looking for. Link to comment Share on other sites More sharing options...
JAinsworth Posted January 22, 2008 Report Share Posted January 22, 2008 you should place a description of what the part number is refering to so we know what we are looking for. Frank, look again :wink: Link to comment Share on other sites More sharing options...
jspecgallant Posted January 24, 2008 Report Share Posted January 24, 2008 Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out. Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop? Link to comment Share on other sites More sharing options...
DasGunner Posted January 24, 2008 Report Share Posted January 24, 2008 It is avilable i purchase one from Rockville for $104 over the summer Link to comment Share on other sites More sharing options...
Richie_Rich Posted January 25, 2008 Report Share Posted January 25, 2008 Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out. Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop?Dad is an engine machine shop. I don't know that any type of machine shop could rebuild it. Link to comment Share on other sites More sharing options...
89PalermoSHP Posted January 25, 2008 Author Report Share Posted January 25, 2008 So would these parts completely rebuild the front end?#14- X1#7- X2#13- X1#21- X1#24- X1#23- X1 Link to comment Share on other sites More sharing options...
jspecgallant Posted January 25, 2008 Report Share Posted January 25, 2008 Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out. Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop?Dad is an engine machine shop. I don't know that any type of machine shop could rebuild it. I have really looked at mine, isn't the ends almost like a tie rod? I was more of thinking of cutting the ends off and tapping the relay rod, then attaching a tie rod. Or modify one from like a ford or chevy but can also check if there is one out there that you can buy at your local parts store. (good idea or just a brain fart) Link to comment Share on other sites More sharing options...
damurida Posted January 27, 2008 Report Share Posted January 27, 2008 top end has them for like $156.00 but the chrysler dlr in gallatin, tn can still order them... there $200.00 bucks though.. special order Link to comment Share on other sites More sharing options...
Richie_Rich Posted January 27, 2008 Report Share Posted January 27, 2008 Just a question the #14 the relay rod package. Looks like it is the ends is part of the issue for it to wear out. Just a tought doesn't dad own a Machine shop, can't he rebuild it for us or any other mahine shop?Dad is an engine machine shop. I don't know that any type of machine shop could rebuild it. I have really looked at mine, isn't the ends almost like a tie rod? I was more of thinking of cutting the ends off and tapping the relay rod, then attaching a tie rod. Or modify one from like a ford or chevy but can also check if there is one out there that you can buy at your local parts store. (good idea or just a brain fart) This is why you can't cut off the ends and tap or thread them.I suppose where the idler arm is you may, but on the driver's side where the pitman arm connects is too close.http://img145.imageshack.us/img145/8017/dscf0011az7.th.jpg Link to comment Share on other sites More sharing options...
Edde Posted January 30, 2008 Report Share Posted January 30, 2008 I think it's still available, but it's the only part N/A aftermarket Link to comment Share on other sites More sharing options...
89PalermoSHP Posted January 30, 2008 Author Report Share Posted January 30, 2008 I ordered 7, 13, 21, 24, 14, 22, 23, and 11 today. Everything is shown as ordered so far. Ill update if anything comes back NLA. Link to comment Share on other sites More sharing options...
Richie_Rich Posted January 30, 2008 Report Share Posted January 30, 2008 What was your total cost? Link to comment Share on other sites More sharing options...
89PalermoSHP Posted January 30, 2008 Author Report Share Posted January 30, 2008 $316 shipped- keep in mind there were 2 of a couple things. I meant to throw ball joints in as well so that will be another $60 or so. Link to comment Share on other sites More sharing options...
89PalermoSHP Posted February 15, 2008 Author Report Share Posted February 15, 2008 I got my order today and everything needed to rebuild the front end is still available. Link to comment Share on other sites More sharing options...
Richie_Rich Posted February 16, 2008 Report Share Posted February 16, 2008 I got my order today and everything needed to rebuild the front end is still available.Totally cool.Thanks for the update and following through with this. Link to comment Share on other sites More sharing options...
Xtreme Industries Posted March 10, 2008 Report Share Posted March 10, 2008 i have no idea what each part number is refering to. i have stockpiled a bunch of stuff and dont want to order duplicate stuff nor do i want to waste my part suppliers time by looking up everything and telling me what it is. can anyone list what each part number is refering to? Link to comment Share on other sites More sharing options...
slowquest Posted March 10, 2008 Report Share Posted March 10, 2008 i have no idea what each part number is refering to. i have stockpiled a bunch of stuff and dont want to order duplicate stuff nor do i want to waste my part suppliers time by looking up everything and telling me what it is. can anyone list what each part number is refering to? If you look at the picture, all parts are numbered, with a part number. reference each of those with the price list below the picture.... Link to comment Share on other sites More sharing options...
Recommended Posts