chris1 Posted January 18, 2007 Report Share Posted January 18, 2007 wtb a header for a 4g64 Quote Link to comment Share on other sites More sharing options...
emagdnim Posted January 18, 2007 Report Share Posted January 18, 2007 I have a t4 style. What are you looking to spend? Quote Link to comment Share on other sites More sharing options...
Mingo1 Posted January 18, 2007 Report Share Posted January 18, 2007 You have pics of this header Quote Link to comment Share on other sites More sharing options...
chris1 Posted January 18, 2007 Author Report Share Posted January 18, 2007 i'm not real sure. can you do a t4 without going mpi? i'd like to find one i could use for basically a stock application. i don't know what my options are. Quote Link to comment Share on other sites More sharing options...
emagdnim Posted January 18, 2007 Report Share Posted January 18, 2007 If you have a 4g64, you don't have TBi. What do you really want. Something for your g54b? Quote Link to comment Share on other sites More sharing options...
chris1 Posted January 19, 2007 Author Report Share Posted January 19, 2007 :oops: i'm an idiot. maybe i turned off my brain for a second there. i'm looking to upgrade my stock 88 starion (as of saturday i hope) i was told a header is an excellent upgrade but have yet to actually see one. (relatively new to the starquest world) any advice would be greatly appreciated. will a t3/t4 work with stock throttle body? i keep hearing a s16g is about as big as you want to go. Quote Link to comment Share on other sites More sharing options...
jszucs Posted January 20, 2007 Report Share Posted January 20, 2007 :oops: i'm an idiot. maybe i turned off my brain for a second there. i'm looking to upgrade my stock 88 starion (as of saturday i hope) i was told a header is an excellent upgrade but have yet to actually see one. (relatively new to the starquest world) any advice would be greatly appreciated. will a t3/t4 work with stock throttle body? i keep hearing a s16g is about as big as you want to go. Well unless it's alreayd totaly custome you have a g54b a 4g64 would be a eclips talon etc DOHC motor not what we have in a conquest / starion. A header is a great upgrade, and will give you other options other then a mitus turbo however with TB injection your going to be kinda maxed out on what you can use. Quote Link to comment Share on other sites More sharing options...
notfried Posted January 20, 2007 Report Share Posted January 20, 2007 if you're running the G54B and you want a header then contact Chad...he makes some real nice ones Turbonetics also has a cast log style manifold for the g54b Quote Link to comment Share on other sites More sharing options...
Mingo1 Posted January 21, 2007 Report Share Posted January 21, 2007 Chad isnt the only one xlusive custom imports makes some and sci motorsports makes some also. Quote Link to comment Share on other sites More sharing options...
lionbull Posted January 22, 2007 Report Share Posted January 22, 2007 Chad isnt the only one xlusive custom imports makes some and sci motorsports makes some also. Xtremeboost makes them as well Quote Link to comment Share on other sites More sharing options...
Mingo1 Posted January 22, 2007 Report Share Posted January 22, 2007 I don't think I have seen the one extremeboost makes. Have a pic of one. Quote Link to comment Share on other sites More sharing options...
lionbull Posted January 22, 2007 Report Share Posted January 22, 2007 I don't think I have seen the one extremeboost makes. Have a pic of one.ofcourse you have he was offering it on a group buy here about 2 years ago people shot him down. this is a glimpse what it looks like. http://www.starquestclub.com/forums/viewtopic.php?t=50446 Wait till you see mine that he made. I will take pics when I get the motor dressed up. Its too cold to be working outside right now so I will get the car painted. Quote Link to comment Share on other sites More sharing options...
Mingo1 Posted January 22, 2007 Report Share Posted January 22, 2007 I like that header that is how I originally wanted mine done. Quote Link to comment Share on other sites More sharing options...
chris1 Posted January 24, 2007 Author Report Share Posted January 24, 2007 lets try this again! nice ride! any idea what he was asking for those headers? Quote Link to comment Share on other sites More sharing options...
tigertron Posted January 25, 2007 Report Share Posted January 25, 2007 lets try this again! nice ride! any idea what he was asking for those headers? pm him. Quote Link to comment Share on other sites More sharing options...
Chad Posted January 25, 2007 Report Share Posted January 25, 2007 http://www.starquestclub.com/forums/viewto...032&start=0 Well , since very few have contacted me I just pulled all the post and will only make the one for my car and a few others . Thanks to those that have contacted me and good luck to all others . Frank You may get him to make one, just don't get excited about the idea untill you get ahld of him and confirm. SQC is a tough group to sell to, most members are cheap (not that that is a bad thing :wink: ) broke, and expect top quality for a bargain price. I don't blame him to backing out of the GP he was going to setup, he has more profitable customers to cater to at his shop I'm sure. There have been several other vendors (Xcir, SFP, a guy who sold them on Ebay, Shaun Silva), all have given up on SQ's due to low volume and low proift. There are only 3 choices currently that I know are currently selling, and 2 of them are cast manifolds similar to the stock one, just slightly improved with a different flange combo. Quote Link to comment Share on other sites More sharing options...
lionbull Posted January 25, 2007 Report Share Posted January 25, 2007 http://www.starquestclub.com/forums/viewto...032&start=0 Well , since very few have contacted me I just pulled all the post and will only make the one for my car and a few others . Thanks to those that have contacted me and good luck to all others . Frank You may get him to make one, just don't get excited about the idea untill you get ahld of him and confirm. SQC is a tough group to sell to, most members are cheap (not that that is a bad thing :wink: ) broke, and expect top quality for a bargain price. I don't blame him to backing out of the GP he was going to setup, he has more profitable customers to cater to at his shop I'm sure. There have been several other vendors (Xcir, SFP, a guy who sold them on Ebay, Shaun Silva), all have given up on SQ's due to low volume and low proift. There are only 3 choices currently that I know are currently selling, and 2 of them are cast manifolds similar to the stock one, just slightly improved with a different flange combo. I got one from Frank. Wait till you all see this crap. Just try to keep your tounges from hitting the floor. Quote Link to comment Share on other sites More sharing options...
Mingo1 Posted January 25, 2007 Report Share Posted January 25, 2007 You can also get a local fabricator to make one exactly how you want it. I am having one made for my car right now. And a buddy of mine had one made for his car also last year and the header is sweet. Quote Link to comment Share on other sites More sharing options...
lionbull Posted January 25, 2007 Report Share Posted January 25, 2007 You can also get a local fabricator to make one exactly how you want it. I am having one made for my car right now. And a buddy of mine had one made for his car also last year and the header is sweet. how much research goes into that. How much testing? I wont buy a header if the design has not been tested on a working vehicle for less than two years. I got mine with a t4 flange. I will be running an sc63 p trim. Quote Link to comment Share on other sites More sharing options...
Mingo1 Posted January 25, 2007 Report Share Posted January 25, 2007 A good fabricator will know what he or she is doing. Questtsi made 569 on a log style manifold and that isn't much more than a beefed up stocker manifold. You don't need to get all crazy in the design for power. My buddy had one made and since has made over 400hp and he is the only one with it. Quote Link to comment Share on other sites More sharing options...
lionbull Posted January 25, 2007 Report Share Posted January 25, 2007 A good fabricator will know what he or she is doing. Questtsi made 569 on a log style manifold and that isn't much more than a beefed up stocker manifold. You don't need to get all crazy in the design for power. My buddy had one made and since has made over 400hp and he is the only one with it. Its cool man. I like the fact mine is one of a kind too. I am the only one with that one in particular. I wonder what his egt's were like during that rin Quote Link to comment Share on other sites More sharing options...
Technology Posted January 26, 2007 Report Share Posted January 26, 2007 Well unless it's alreayd totaly custome you have a g54b a 4g64 would be a eclips talon etc DOHC motor not what we have in a conquest / starion. A header is a great upgrade, and will give you other options other then a mitus turbo however with TB injection your going to be kinda maxed out on what you can use.Please learn english before instructing n00bs on how to mod their stock conquest. chris1 - a header is not the first thing you should do. A search is, though. Quote Link to comment Share on other sites More sharing options...
chris1 Posted January 26, 2007 Author Report Share Posted January 26, 2007 i appreciate your input. i am very new to the starquest world, and very interested in learning as much as poss. there seem to be many conflicting viewpoints as to the most effective early-stage upgrades, and i'm having trouble sorting through them. the reason i am looking for a header, is that i spoke w/what seemed like a very knowledgeable person from this club, who's name escapes me, who told me this was a very effective and underused upgrade. i'm afraid to turn this into a q&a because i know this is an items wanted forum, but if there is a reason i should not pursue this upgrade at this time, i am more than open to advice. Quote Link to comment Share on other sites More sharing options...
MontyTSI Posted January 26, 2007 Report Share Posted January 26, 2007 A good fabricator will know what he or she is doing. Questtsi made 569 on a log style manifold and that isn't much more than a beefed up stocker manifold. You don't need to get all crazy in the design for power. My buddy had one made and since has made over 400hp and he is the only one with it. ill agree with that.. but the entire torque curve can be manipulated by the header itself, all depends what you are looking for. ID, length, collector desig all have a play in making your car perform as you have intended. i suggest calling the guys you want to have a header made by, the two members mentioned here are decent fellows..it all comes down to what exactly you want and who you get the best feeling about. Quote Link to comment Share on other sites More sharing options...
chris1 Posted February 23, 2007 Author Report Share Posted February 23, 2007 thanks guys!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.