jpmilkovich

I have 2 complete doors off an 89. One is mint and the other has a dent in the corner. Im in PA. Interested?

Will be going to scrap yard soon

Just edited post. $200 for everything

Doors, Hatch, and rocker still up for grabs. Would anyone be willing to go $200 OBO for it all?

Doors, rocker and hatch till available. I would like to get 100 each or 250 for all.

Still available.

I have not been around here for a long time nor have I owned one of these fun cars. Cleaning out my fathers basement I found some great parts. All parts are off my 89 buckskin conquest. I have a hatch, both doors, and 1 rocker panel. The drivers door has the front corner slightly bent. Other than that all parts are as perfect as they can be. There may be a ding or small scratch. I may also have an AC elimination kit. IT would include the compressor mounting bracket eliminator. This part is factory from a car that came without AC. I also have the duct to replace the AC box under the dash. No reasonable offer will be refused. Would consider package deal. I am located in Lemoyne PA. the best way to reach me is via email at jmilkovich@comcast.net. If anyone is willing to bite ill go 200 for it all.

from what i gather there are the cheap coil overs that lower you car alot but make it handle like crap. it is not a true coil over suspension kit. for get it

check out www.clearcorners.com they have a complete clear fog light set-up josh

you can get skylines here that are emissions legal from moto-rex at www.skylinegtr.com

TARGA HAS BEEN DONE. IT LOOKS LIKE CRAP BECAUSE THE DOOR FRAME HAS TO BE CUT. THERE IS ONE IN A SCRAP YARD BY HEAR THAT HAS BEEN STRIPPED TO PIECES.

does the sds eliminate the mas?????? this does cheaply with a pressure sensor. hks has a set up but it is like 1000

xs-engineering in cali told me it was easy. how long ago did you try this because this is a new item for greddy

with this setup you can run your mpi and eliminate for mas for around $600.  how sweet is that.  plus it has the greddy name on it. e-Manage (piggy-back fuel computer) e-Manage is an inexpensive programmable fuel management system that allows you to properly tune your factory fuel system, without having to change the entire factory ECU system to an expensive "stand-alone" unit. The e-Manage system is a universal "piggy-back" type unit, which taps into most factory ECU wiring and it still utilizes the existing sensors. Basic functions will allow the user to slightly alter factory injector duty-cycle(± 20% at 5 preset RPM points), by intercepting and altering airflow or MAP sensor signals. For VTEC cars you can adjust the VTEC shift point. Additional features that are built into the system, but are only accessible though the use of our PC-Windows based "e-Manage Support Tool" communication software (Please see our Authorized GReddy Support Dealers for more information) are a 16x16 Airflow Adjustmemt Map, Larger Main Injector correction adjustment, Upgrade Air Flow Meter adjustment, Boost Limiter Cut, Anti-engine Stall, VTEC-fuel adjustment, Real-time Map Trace, Real-time Display, Real-time Communication, and basic Data-logging. With the use of our "Optional Injector Harness" and the software, the unit has the ability to control an additional 16x16 Injector duty cycle Map and the Controls for adding up to 2 Addional Sub-injectors. If the "Optional Ignition Harrness" and the software is used the unit has the ability to control a 16x16 Ignition Timing Map. All of the above Maps can also be Map-traced in Real-time as well. If the factory range of Map or Airflow meter is surpassed, you can incorperate our "Optional GReddy Pressure Sensor and Pressue Harness" to set larger scales of ajustment. Part # Description List Price 15500550 e-Manage (main unit) $379.00 15500901 Optional Injector Harness $38.50 15500902 Optional Ignition Harness $41.80 16401301 GReddy Pressure Sensor $120.00 16401406 Pressure Sensor Harness $35.00 TBA e-Manage Support Tool see AGSD

put me on the list for varbon fiber. every 10th of a second counts