stoopideric Posted October 14, 2014 Report Share Posted October 14, 2014 I can only get one injector at a time to fire. I have the correct voltage to both clips, which are new, and can switch the working clip to either injector. The strange thing is this, one of the clips was working on either injector and the only difference in the 2 was the working one had voltage on the black wire and the non working on the red. So I switched the wires on the non working clip and it worked but the other one stopped working. Both ground out when turning the engine over. Link to comment Share on other sites More sharing options...
stoopideric Posted October 15, 2014 Author Report Share Posted October 15, 2014 It mysteriously fixed itself after I unplugged the ecu and plugged it back in.......must have had trash in the wires lol. Link to comment Share on other sites More sharing options...
Recommended Posts