Wegmann01

Ok, thanks for answer

Thanks for reply But the manual climate control panel is using the most of this parts, or not? I'm asking, because I will do the digital dash conversion anyway and the wiring harness for digital climate control module is still in the stock harness behind the module. Any ideas or expiriences? Thanks for answer

And does anyone have one to sell??

Does enyone made a conversion?

Hi I asked myself if it's possible to changeca standard manual hvac module with an automatic one? Can I simple change this modules? Thanks for your answers

It works

I gave it up to search fitting A - Pillar gauges. A week ago i bought the radio panel from MotoCam360. In this panel I can mount three gauges Thanks for the tip!! But I'm still searching a full digital Technica dash

I have a 83 semi digital cluster here. I'm still searching a full digital cluster....any ideas where I can get one?

Thnks, I know rockauto. I ordered also parts for my Trans Am's and Fieros in the past And of my Mitsus now I ordered a universal "one wire" O2 sensor at the local auto store. Today I can pick up and then I will see if it works

Thank you very much 😊

With the O2 sensor I have, it's not possible to unscrew the mounting bracket. It's welded.

Hi At the moment I' upgrading my Starion and do basic maintenance. I was also mounting a MK1 downpipe on my stock 12a. The coil to mount a new O2 sensor is different to the stock downpipe. Now my question: Which O2 sensor can I mount on the shown coik, who gives me the same resist to the ECU as the stock one? Thanks for answering. Kind regards from Switzerland

Oooh, thanks for all your friendly replies. I just noticed that the attached pictures are only thumbnails. Here Pictures to open http://www7.pic-upload.de/thumb/22.01.14/nqjjxbn97oo.jpg http://www7.pic-upload.de/thumb/22.01.14/rzg2t2nvzl2w.jpg http://www7.pic-upload.de/thumb/22.01.14/b2jmgqc3shka.jpg http://www7.pic-upload.de/thumb/22.01.14/7qvjsejgcuts.jpg http://www7.pic-upload.de/thumb/22.01.14/d77zcdeaugy4.jpg

I asked also D2, but they wouldn't give me a road cerfificate for such an old car. So I mounted a XYZ

I can't compare it with another coilover specific in a Starion. But my friend's AE86 has mounted a KW3 and there's no big difference. But it's not the same car, difficult to compare But I would say, it's definitely better than a D2 or a K-Sport coilover. Here in Europe XYZ is mostly unknown. We have KW, Tein, D2 and K-Sport and the local brands from Germany (right next to Switzerland ) Eibach and Bilstein. But in asian Ralley and track races XYZ is a brand since aprox. 10 years. Which coilovers are driven in US?