Jump to content

slk88

Members
  • Posts

    253
  • Joined

  • Last visited

  • Days Won

    1

slk88 last won the day on June 7 2013

slk88 had the most liked content!

Profile Information

  • Location
    Los Angeles
  • Gender
    Male

Previous Fields

  • Zip Code
    91214
  • Model
    Other
  • Type
    Other
  • Model Year
    1988
  • Interior Color
    Black
  • Status
    On the road

slk88's Achievements

Newbie

Newbie (1/14)

2

Reputation

  1. Oh Ok ill try that, just fyi though it pops up but doesn't go back down when I press the off button...
  2. I want to add that I don't have a ground which hooks up to the coil bracket that contains a small square black box resistor and runs from a white wire/connector into the driver side harness. For some reason the harness that I have is missing the resistor ground and the white wires/connector that feed into it. The root of my problem might be here I am thinking since the mixed voltage signal I am reading on my voltmeter is showing Millivolts which climbs from 20mv all the way to 200mV then .5V and keeps circling back down to 20mV again?
  3. Hello all, I have had this problem after swapping out the original harness with another one bought off a forum member. In fact I have had this same problem on my 88 Mitsubishi Starion with two swapped harnesses. The problem to put it in the simplest way is that I'm receiving a mixed positive voltage signal on 1 of the two injector terminals that should be reading 0 volts. The other injector terminal reads a perfect +12.8 volts as it should be. I am also getting the mixed positive signal reading on various other connector wires that should be giving me a ground signal. Most of these wires are on the relay connector wires for Alarm and AC functions behind the battery. Also I am getting a reading of 0 volts on some of those relay wires that should be getting a +12 volt signal. This problem is driving me nuts I have checked all the ground wires in the car for good contact and fuses including the fusible links.
  4. I am looking for a working pop up light switch that goes on the gauge hood on the left side to turn on and off the pop up lights. Please let me know if you have one asap. Thanks -Patrick
  5. Just like the title sayings I want to purchase a good working condition 88 Mitsubishi Starion ETACS unit. Please let me know if you have one...
  6. Can't believe these haven't sold yet. Someone take these beauties off my hands!
  7. $350 shipped now. Don't need these anymore went back to stock.
×
×
  • Create New...