dsm9478 Posted November 4, 2013 Report Share Posted November 4, 2013 "I have a very rare mitsubish starion that has many bolts on but im just testing the waters for possible sale because i have many projects going on this car needs some work to be running and driving but i will try my best to list everything to my best knowledge Good Forged pistons unknown brand i couldnt reference the part number on them but they aremt stock because i own two more of these cars and i have pics of the pistons when i jad the head off of the car Arp head studs Shneider 274 racing cam have pictures of that as well from the head being off i do have pics to verify this Aftermarket valve springs and retainers Factory recast head that does not have the jet valve holes very expensive costs like 6 to 700 new without the valves or anything Multilayer steel head gasket for high boost Holset hx35 turbo appears to be rebuilt absolutely no shaft play Custom apexi 3 inch exhaust Custom multiport intak manifold these cost 1500 alone but thats when you can find them on the internet and this one is alot bigger than most other ones i have seen 1600cc injectors Tuned on e85 will need a retune Walbro 327 fuel pump i believe i can get pics though but i know its big cause i took it out awhile ago because i thought i was having fuel problems Big front mount intercooler Brand new top of the line racing tires i doubt they have but maybe 500 miles on them i can figure out the brand if you would like Oversized intake and exhaust valves not sure of the brand again but i have pics from when the head was off Lots of new parts its a freshly rebuilt motor also has the balance shafts eliminated Custom high flow fuel rail Has been coverted over to a 90 eagle talon tsi wiring harness in order to support the multiport fuel injection swap and that being said the factory ignition system is that of a talon instead of the factory distributor and coil it now has a coil pack with a cam sensor for better spark Now onto the bad i will start with the worst The car currently does not run because the cam needs to be remade the bracket that is supposed to spin the cam sensor broke off so the car isnt getting a signal to spark or pulse the injectors i plan on pulling the cam this weekend though so it may be running by the time you r reading this ad but i have the end of a stock talon cam that need welded or pressed into the schneider cam and then the car will run it only takes roughly an hour to pull the cam if i get it running the price will go up The interior isnt too bad but could use some cleaning up The front bumper like all starquests is cracked but i planeed on bondoing it and painting over it Finally the paint job isnt the greatest you can tell the car has been painted a few times before also but i believe that it just needs a good wet sanding to look a little better This car is one of a kind and i wont let her go for cheap id rather get it running and drive it because there are very few of these cars that are fully built because parts are very hard to get a hold of when going aftermarket and when you do find them they cost lots of money Update i pulled the cam and it is off to get fixed so right now all you would have to do is put it back together But hit me up with your best offers id love to trade for a clean first gen awd talon especially one with popups but other than other dsms please no trades my asking price is 4000 obo cash you could part this car out on the forums for more than i am asking so please be reasonably with your offers im not afraid to say no to lowballers you may call or text me at 3144432749 for pics and more info i will tell you all that i know and im sure i am forgetting some things also" This is my original craigslist posting I would like to see what kind of interest I can get on the forums because i would be willing to be a little more flexible since most of us on the forums have more respect for these cars than craigslist people. I may be willing to part the car out if i can get enough interest I dont want to go this route id much rather give someone this as a package deal but please message me or text me with your offers I am located about an hour north of st louis, MO in Troy, Mo. and I am more than willing to answer any questions you have and send pics via text message, but for now I will post a link to my craigslist ad with some pictures for you guys to view. just please help me out i am trying to build my twin turboed stealth right now and i already own a total of three starquests lol http://stlouis.craigslist.org/cto/4078330873.html Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 4, 2013 Author Report Share Posted November 4, 2013 Also the actual mileage of the car is unknown the dash says roughly 32k miles but I can not verify this to be true it may or may not be the actual mileage Quote Link to comment Share on other sites More sharing options...
NikoFab Posted November 4, 2013 Report Share Posted November 4, 2013 Lots of nice goodies there. Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 4, 2013 Author Report Share Posted November 4, 2013 Thanks let me know if your interested in anything i just got the cam back today and plan on installing it when i get time at home Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 5, 2013 Author Report Share Posted November 5, 2013 Update just received the cam back from my guy today and as soon as I get a day home I will install and have it running then the car should just need a tune and a good home Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 6, 2013 Author Report Share Posted November 6, 2013 Come on guys need some help should be running soon Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 6, 2013 Author Report Share Posted November 6, 2013 Car is also set up to run dsm link just costs 500 to send the ecu off and get it installed Quote Link to comment Share on other sites More sharing options...
mistapickles Posted November 6, 2013 Report Share Posted November 6, 2013 orale Gringo... Quote Link to comment Share on other sites More sharing options...
SOTTY Posted November 6, 2013 Report Share Posted November 6, 2013 ^ lol ! Quote Link to comment Share on other sites More sharing options...
CaliConquestAlex Posted November 6, 2013 Report Share Posted November 6, 2013 I like how you only focus on the mechanical stuff and nothing mentioned about the interior or gauges or anything else. There's a boatload of cash obviously dropped into this ride. If I didn't have an MPI car already I'd be all over this.someone could convert this thing to megasquirt with a crank trigger wheel and throw a stock cam into it and be golden. GLWS! Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 6, 2013 Author Report Share Posted November 6, 2013 Thanks and yes I forgot to mention interior gauges are all aftermarket but other than that it's stock on the inside I can get a picture of the dash but basically since it has a talon wiring harness none of the factory gauges work so they have been replaced with higher end aftermarket gauges but still keeps the stock appearance unless you are in the car looking at it just let me know what all questions anyone has that is interested and I believe the car has no rust and if it does it isn't visible Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 10, 2013 Author Report Share Posted November 10, 2013 Come one guys this car should easily have 500+ hp please help and I got the cam back now just need a day home to put it in and she will run Quote Link to comment Share on other sites More sharing options...
lfatty Posted November 13, 2013 Report Share Posted November 13, 2013 This is the old starquest slut. Back in the day used to be JAHJAH's then GARYCHOFFMAN's and I ended with it. I'd take it back but I've moved on to my new 5.0. If you need any info about what's on it let me know. Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 13, 2013 Author Report Share Posted November 13, 2013 Yeah I bought it of of you I believe and just been traveling too much and four projects are too many right now so gotta sell one to work on the others Quote Link to comment Share on other sites More sharing options...
lfatty Posted November 13, 2013 Report Share Posted November 13, 2013 Ah I see. Ya I miss this car but my 5.0 has my money tied up for the moment. Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 13, 2013 Author Report Share Posted November 13, 2013 Yeah I hear you hopefully ill see u around at gateway next season Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 13, 2013 Author Report Share Posted November 13, 2013 Do you know the brand of the intake manifold or is just custom? Quote Link to comment Share on other sites More sharing options...
lfatty Posted November 13, 2013 Report Share Posted November 13, 2013 (edited) That just might happen. The intake manifold I made myself. People were wanting 700+ for a mpi intake. I had 50$ for a flange and 80$ in aluminum in that thing. Whole lot less. I think there is still a couple pics in my gallery. Edited November 13, 2013 by lfatty Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 13, 2013 Author Report Share Posted November 13, 2013 Okay cool thanks I have had alot of people ask Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 16, 2013 Author Report Share Posted November 16, 2013 Update the cam is installed now and everything is put bac together just gotta rotate the cam sensor 180 degrees and she should fire right up now Quote Link to comment Share on other sites More sharing options...
jahjah Posted November 22, 2013 Report Share Posted November 22, 2013 Wow. my old car? Good luck to whomever ends up with it! Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 27, 2013 Author Report Share Posted November 27, 2013 Any interests I'm reasonable on the price please don't make me part this Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted November 27, 2013 Author Report Share Posted November 27, 2013 Please don't make me part this out because the place I have it I can't store it there much longer I'm also open to trades I wouldn't mind a banshee plus cash or a first gen eagle talon Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted December 1, 2013 Author Report Share Posted December 1, 2013 Price lowered 3000 obo I dont wannt to have to part it out but if I dont get offers ill have to Quote Link to comment Share on other sites More sharing options...
importwarrior Posted December 1, 2013 Report Share Posted December 1, 2013 3K is a deal!!!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.