Indiana Posted June 9, 2010 Report Share Posted June 9, 2010 (edited) Starter bolts have a fatter shoulder on them that extends down an inch or so then the bolt is smaller and threaded on the end. Edited June 9, 2010 by Indiana Link to comment Share on other sites More sharing options...
Technology Posted June 9, 2010 Report Share Posted June 9, 2010 I have mixed up starter and lower bellhousing bolts before. They do thread in to either location, but it doesn't work very well. Link to comment Share on other sites More sharing options...
TopDawg_43 Posted June 9, 2010 Author Report Share Posted June 9, 2010 They Mitsubishi have a rebuild division for small electrical like starters and alternatorsthere will be an "R" in front of the part number. If the part number hasn't changed it would be R-MD072585. I have a new starter. I need the bolts. Link to comment Share on other sites More sharing options...
TopDawg_43 Posted June 9, 2010 Author Report Share Posted June 9, 2010 I have mixed up starter and lower bellhousing bolts before. They do thread in to either location, but it doesn't work very well. yeah, that must be what I did two rebuilds ago. I may need to go through and pull each tranny bolt one by one. My starter bolts might be in there somewhere. Link to comment Share on other sites More sharing options...
Recommended Posts